Nitro 5 AN515-54 won't boot up and saying no bootable devices.What should I do to fix this?

arachn0id
arachn0id Member Posts: 1 New User
edited July 2023 in Nitro Gaming

Hi, I have been unable to boot up my laptop. When I try to, it just comes up with a thing saying no bootable devices. I have tried to change bios settings following other's advice, but nothing worked. I even got a flash drive to reinstall windows, but when I booted up into the flash drive it would just bootloop on the acer logo with a spinning wheel/loading thing. What should I do to fix this?

[Edited the thread to add issue detail]

Answers

  • Puraw
    Puraw ACE, Member Posts: 14,730 Trailblazer

    Probably the bootloader got corrupted. When you Clean installed Windows10 with an ISO image was that USB made on another W10 PC and did you select that the ISO would be installed on a different PC?

    When in a bind, I recommend bringing your laptop to Acer Services in your country to reset the system to factory defaults and load OEM Windows10. A small service fee is charged by Acer, in the Philippines $25.

  • StevenGen
    StevenGen ACE Posts: 12,829 Trailblazer
    edited July 2023

    The “No Bootable Device” is 99% of times because your M.2 boot drive (which is a PCIe 3x4 type drive) has corrupted OS files and/or has damaged OS files that need repairing as the laptop can’t use its files or drive to boot the laptop. Try to get into the Troubleshooting blue screen with the Win-10 installation USB and fix the startup files, if that doesn’t work then try to do a Clean Install of Win-10 and make sure that you Delete and then after the delete you install the AN515-54s IRST (Intel® Rapid Storage Technology) Driver Version: 17.9.1008.0 and see if the installation of this IRST Intel driver fixes your problems, after you have newly installed Win-10, if not its defiantly the boot M.2 drive that needs to be replaced and you need to do the Clean Install of Win-10 again, once you have finished the new OS installation make sure that you update the bios to this laptops last bios the Version 1.33 also update to all the Nvidia (RTX1050 or the RTX2050or RTX2060 whichever you have?) and install the Intel® Driver & Support Assistant and do a scan to install all the latest drivers as that makes a big difference of how your laptop performs.

    Note: this laptop i5-8300H or its i7-8750H CPUs and its motherboard TPM 2.0 are all Win-11 compatible, so try to run this laptop on Win-11 as that could also be a better upgrade solution, but remember that Acer does not have any Win-11 files for your AN515-54 in their Driver & Manuals section, so you will have to get all drivers through windows update and Nvidia and Intel sources which have all the drivers that you need to make your AN515-54 operate under Win-11 OS.