Can I switch case with the stock acer nitro n50-610 motherboard?

WKN
WKN Member Posts: 5

Tinkerer

edited July 2023 in Nitro Gaming

Hi, my name is Jochen and I bought my acer nitro N50-610 with intel core i7 10700 with gtx 1660 super 6gb. And I want to switch case to a LC-Power Gaming 703B Quad-Luxx ( https://www.digitec.ch/de/s1/product/lc-power-gaming-703b-quad-luxx-matx-mini-itx-atx-pc-gehaeuse-12776421 ) and i don't know if that would work.
Thank you

Best Answer

  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Answer ✓

    Yes as mentioned earlier, it should work. The factory N50-610 case and motherboard dimensions and specifications are shown below. The LC case seems to have plenty of room for the small DTX motherboard since it uses the same screw hole pattern as the ATX & mATX boards. You might have to make some adjustments for running cable connections from the motherboard to the LC case exterior.

    Case (W x H x D) 175mm x 376mm x 360mm (6.9in x 14.8in x 14.2in)
    Motherboard form factor standard DTX compatible
    Motherboard (W × H) 200mm*321mm, 4 Layers

    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Answer ✓

    Yes as mentioned earlier, it should work. The factory N50-610 case and motherboard dimensions and specifications are shown below. The LC case seems to have plenty of room for the small DTX motherboard since it uses the same screw hole pattern as the ATX & mATX boards. You might have to make some adjustments for running cable connections from the motherboard to the LC case exterior.

    Case (W x H x D) 175mm x 376mm x 360mm (6.9in x 14.8in x 14.2in)
    Motherboard form factor standard DTX compatible
    Motherboard (W × H) 200mm*321mm, 4 Layers

    Jack E/NJ