acer nitro 5 an515-55-56R2 Need help for SSD compatibility

Sandyvee
Sandyvee Member Posts: 3 New User
edited April 2023 in Nitro Gaming

I have an PNY CS1031 M.2 2280 NVMe Gen3x4 SSD and I was wondering of installing it on my acer nitro 5 an515-55-56R2 and I need help if that is complatible for me to install it, if not what are other budget freindly alternatives ssd I can get? and also I'm gonna be installing it on my own, should I disconnect first the battery before installing it or is it ok to just quickyl install it without disconnecting my battery, I don't any anti static wrist on me.

[Edited the thread to add model name to the title]

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,708 Trailblazer

    Hi,

    Yes, it's compatible with your model, I would suggest you disconnect the battery when you open the base cover, then press power button to discharge any remaining electricity, install the M.2 SSD and reconnect the battery before closing the base cover.

    https://www.youtube.com/watch?v=hyIwagLXZLA

  • StevenGen
    StevenGen ACE Posts: 12,841 Trailblazer
    edited April 2023

    The PNY CS1031 M.2 2280 NVMe Gen3x4 SSD is a fully compatible M.2 SSD drive for your Nitro 5 AN515-55 laptop, as your laptop M.2 interface is PCIe 3x4 only, don’t put PCIe4x4 as it’s a waste of money and your laptop will never ever use its max read/write speeds of 5000MB/s..

    If you want to use this PNY drive as a boot drive then you need to install the PNY drive into the left M.2 slot of your AN515-56 laptop (as you look at the laptop with is back cover off) as using the laptops internal M.2 slot is 100% quicker than using an external adaptor to clone a new drive, after you have cloned the drive, swap the old boot drive with the new drive to the right M.2 slot of the laptop as the right M.2 slot is allot quicker M.2 drive than the left M.2 slot of your AN515-55 laptop. The right slot can work with PCIe3x4 drives of read/write speed of up to 3500MB/s while the left M.2 slot of the laptop only work with speeds of up to read/write of 2500MB/s, so remember this, as you need to also use the OEM PNY cloning software from AOMEI like described below:

    AOMEI Partition Assistant Professional, as this Disk Clone feature enables you to transfer all contents on the existing hard drive to PNY SSD without reinstalling Windows. As it can clone only used space on the source drive, you can use it to clone to smaller SSD as long as the capacity of SSD larger than the used space. Besides, it can also migrate only OS to SSD