My A315-53G-599B is not booting up. It says in the screen that No Bootable Device

RnL1918

When I go to system boot and change it to Legacy, the error showed;

PXE-E61 which defines Media Test Failure, Check Cable

PXE-M0F ehich defines Exiting PXE ROM. No bootable device -- insert fisk and press any key.

I tried to remove the hdd and reinstall but it is still not working.

Please you insight and our workaround.

William_mk2

@RnL1918

I am really sorry for the inconvenience. First of all we need to check whether it is getting detected in bios. Tap f2 while turning on the computer. It will take you to bios. On the info menu - You can see hdd0 model name , Hdd0 serial no, Hdd1 model name, Hdd1 serial no. Please look at the right side of all these 4 options. It will say the name of the hdd and serial no. If you have 2 hdds present on your computer it will show you 2 brand name of hdd and serial no.

If it is not detected in bios then that means your hdd and motherboard are not communicating with each other. It might be a cable related issue or you might have the reseat the hdd to make it to communicate with motherboard.

I am really sorry for the inconvenience..   Let us do the basic steps first..

Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:

Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.

If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 
 
If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.

Connect all the cables back and restart the computer.  

While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   
 
It might also be the issue with battery, charger or power outlet.   Try to use the charger in a different room on a different power outlet.  Try to bypass the surge protector and connect it directly to power outlet.    Try to use an alternative charger if possible.    Try to turn on the computer without the charger and check it  ( as long as the battery is not drained out )  

 
It should work fine.. 

RnL1918

https://community.acer.com/en/discussion/comment/1192676#Comment_1192676

@William_mk2

I tried the above step but still not working. The hdd is still not detected

William_mk2

@RnL1918

It is quite clear that your motherboard is not communicating with the hdd. It might be a loose cable connection or simple reseat of hdd might help you. You can also try it with a alternative hdd to isolate the issue or you can even try this hdd on a different computer.

I understand even after doing the steps mentioned on the previous comment still you are facing the same issue.

It looks like a hardware issue.

If your laptop is in warranty you can contact the warranty dept.     Go to the website support.acer.com - chose your country.   On the new page - scroll down -  click on "contact support".  Scroll down.  You can find the phone no to contact the warranty dept. 

If it is out of warranty, please contact local store or

Go to the website support.acer.com - chose your country.   On the new page - scroll down -  Click on  "Repair My Acer" - Request to have your Acer product repaired.   There will be charges for repair. 

Additional info to contact Acer Store:  Please visit the website - support.acer.com - chose your country - click on shop.   You can buy desktop, laptop, monitor and accessories.  Alternatively,  on the top right corner you can find the phone no to contact Acer store.   For the parts which are not available on Acer store, you have to contact local store.