Nitro 517-41. Ryzen 5600H and RTX 3060. PCI-E running @ x8 3.0 instead of x16 4.0.

FusisiorNL
FusisiorNL Member Posts: 4 New User
edited February 2023 in Nitro Gaming

Nitro 517-41. Ryzen 5600H and RTX 3060. PCI-E running @ x8.3.0 instead of x16 4.0

Says GPU-Z. Even after rendering. How can I change this?

Thanks

Answers

  • StevenGen
    StevenGen ACE Posts: 12,180 Trailblazer

    You need to update the AN517-41s firmware to the Nvidia discrete VGA VBIOS and improve performance -Version:v102a from the Acer Drivers & Manuals and also update the Nvidia last driver for the RTX-3060 - GeForce Game Ready Driver Version: 528.49 WHQL and use this graphics drivers Clean Install feature in the Advanced part of the driver when you install this graphics driver, as that will uninstall all previous NVidia drivers for the RTX-3060.

    Also update to the last bios version for the AN517-41 which is the; 1.Enable Win11 SV2 Support version 1.10. as all this will bring the Bus Interface to be at PCIe x16 4.0 @ x4 1.1

    Be warned and very careful and follow all the bios and firmware proper update guides and read the installation instructions, I take no responsibility if you brick your laptop or brick the gpu, as Acer warns every user about bios and firmware updates “Upgrading your system BIOS incorrectly could harm your Acer product. Please proceed with caution”!

  • FusisiorNL
    FusisiorNL Member Posts: 4 New User
    edited February 2023

    Hey there friend,

    I've already got the BIOS v1.10 and the VBIOS v1.02a installed.

    removing as always the Nvidia drivers with DDU. And installing the newest afterwards with NVCleanInstall v1.15.1.

    Also I've got Nvidia GeForce Experience prog installed.

    Everything is up-to-date.

    Can it possibly be an BIOS Setting then?

    Best regards,

    Teun.