acer swift 5 How do i fix bootable device, Enter key not working on the keyboard

Alem418
Alem418 Member Posts: 2 New User
edited February 2023 in Acer Software

How do i fix this i know i press f2 to get to the biops menu, but my enter key on the keyboard dosent work?

[Edited the thread to add model name to the title]

Answers

  • billsey
    billsey ACE Posts: 31,672 Trailblazer

    What computer do you have? The full model number is usually on the same sticker as your serial number. What kind and size of drive is installed? Which OS are you running? That type of error is almost always something wrong in the BIOS settings or a failed drive.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Alem418
    Alem418 Member Posts: 2 New User
    edited February 2023

    I have an acer swift 5, serial number SN:NXGQJED002XXXX. Yeah i know how to fix it but my enter key on the keyboard dosent work

    [Edited the content to hide sensitive information]

  • billsey
    billsey ACE Posts: 31,672 Trailblazer

    OK, for the future your model number is a SF314-52-xxxx, I can't lookup the last few digits since that model likely wasn't sold in the US. If only the enter key is not working you can always get around it with an external keyboard, but likely the issue is with some gunk stuck under the key to it doesn't make contact between the membrane layer when you press. A good cleaning might resurrect it...

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • leonaip
    leonaip Member Posts: 417 Specialist WiFi Icon
    edited February 2023


    use your on screen keyboard mate (if already logged in)

    or use usb keyboard from desktop computers

    [Edited the content to hide sensitive information]

    If my answers/solutions help you, please consider hitting "Like" and "Yes".

    Regards and God speed 😉


    Acer Nitro 5 AN515-58

    - Intel Core i5-12500H 12th gen Octacore ( 2.70 ghz... Turbo up to 4.50 ghz ) with p-cores and e-cores

    - 15.6 inch thin bezel IPS FHD ( 1920X1080 ) 144hz

    - RAM 8 GB DDR4 MAX 32 GB

    - SSD 512 GB Nvme

    - Nvidia Geforce RTX 3050 ( DEDICATED 4 GB GDDR6 )


  • leonaip
    leonaip Member Posts: 417 Specialist WiFi Icon
    1. connect a usb keyboard from desktop computer to the usb port of your laptop... turn off your laptop then turn on again. press repeatedly Esc or F2 until you enter the BIOS
    2. inspect if your HDD/SSD is detected. (if not detected, it needs replacement.... but if detected, inspect the boot mode and try Legacy or UEFI - if legacy, change to UEFI and vice versa then save settings and exit to restart laptop)... you can also press F9 to load setup defaults.

    If my answers/solutions help you, please consider hitting "Like" and "Yes".

    Regards and God speed 😉


    Acer Nitro 5 AN515-58

    - Intel Core i5-12500H 12th gen Octacore ( 2.70 ghz... Turbo up to 4.50 ghz ) with p-cores and e-cores

    - 15.6 inch thin bezel IPS FHD ( 1920X1080 ) 144hz

    - RAM 8 GB DDR4 MAX 32 GB

    - SSD 512 GB Nvme

    - Nvidia Geforce RTX 3050 ( DEDICATED 4 GB GDDR6 )


  • billsey
    billsey ACE Posts: 31,672 Trailblazer

    Do not set legacy mode! That hasn't been used for more years than your Swift 5 is old, since the first release of Windows 7 in fact. Setting legacy in your BIOS will fully break booting and leave you wide open to rootkit viruses.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.