Upgrading my Acer Nitro AN515-43 Do i need to replace the thermal paste?

DontPan1k
DontPan1k Member Posts: 1 New User
edited February 2023 in Nitro Gaming

Hello. Ive been experiencing sudden drop of FPS during in game even though all effects on the game are all in low setting. I also see that temperature of the laptop is increasing up to 90°c+

1. Will upgrading my RAM would help? I currently have 16gb of ram.


2. Do i need to replace the thermal paste?

 [Edited the thread to add issue detail]

Answers

  • @DontPan1k


    Kindly go through the details from the links given below


    https://community.acer.com/en/discussion/612495/windows-10-optimization-guide-for-gaming/p1

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • StevenGen
    StevenGen ACE Posts: 9,934 Trailblazer
    edited February 2023

    I don't know which exact Nitro AN515-43 you have as this laptop comes with two different AMD CPUs, but if your laptop has the GeForce GTX 1650 with the Ryzen 5 3550H CPU, this configuration has 23.7% of graphic card bottleneck at 1920 × 1080 (FHD (1080p)) resolution. When playing games your processor won't perform at its maximum possible performances (won't be utilized to the maximum), because your graphic card cannot handle delivered data fast enough.

    This theoretically means that utilization of your graphic card will be on maximum and the potential of the processor will not be completely used and your GPU will overheat and that is why you are getting those high temps. You can overclock the GTX1650 (be warned that overclocking can damage your GPU and destroy it) which can give you at best and safest, an increase of 5% in performance.

    Increasing ram, I would do only if you have 1x 8GB in single channel ram installed in your laptop currently, its essential that you have at least 16GB of ram in Dual Channel especially if you play games. Either match and upgrade the existing 1x 8GB DDR4 ram with an extra and exact spec ram module or get the fastest ram spec for this laptop the DDR4-3200MHz and preferably buy a 16GB kit from Crucial which is the Crucial 16GB Kit (2 x 8GB) DDR4-3200 SODIMM with these specs, DDR4-3200 • CL=22 • NON-ECC • SODIMM • 260-pin • 1.2V • 2Rx8/1Rx8/1Rx16 • PC4-25600.

    Cleaning your laptops internals is also essential like its vents, fans and repasting the CPU/GPU and making sure that all the thermal pads are making contact and are in good condition is also essential for this laptop to have satisfactory thermal insulation, use the Thermal Grizzly range of paste and pads, as they are a high-end product and also a laptop cooling tablet can also help to reduce heat in gaming. Do all that as I'm sure that doing the above will reduce your het problems.

    Try these resolutions below, the Result table equals the GPUs bottleneck % at that resolution: Your current bottleneck GPU is at 25% at 1920 × 1080 resolution and it can be reduced to the following by adopting these resolutions:



  • @DontPan1k


    I would like to provide some additional info which will really help you. 


    Kindly go through the details given below. The info provided below will be very helpful to get the current memory and ssd details of your computer and the options to upgrade it.  


    Please visit the website given below. There is an option to "start your scan " and " select your computer " . Please chose the options and try it. It will show you the memory and SSD’s details and the best upgrade options for you.. 


    https://www.crucial.com/


    It will tell you what you currently have and what you can add for memory and SSD's. 


    Note: If you decide to buy you can always compare the prices by visiting other websites or stores and then you can decide. We are providing the info of scan app just to show you the upgrade options. You can even download similar scan apps from other memory upgrade websites too.      


    To check the compatibility of ram which you can use on your computer.. Get CPUz and check it with that in SPD section of all the RAM and specs that you have, its a quick and simple way to check all OEM specs and what you have in your system. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • @DontPan1k


    Kindly go through the details captured from service manual designed for your computer.


    Pict 1



    Pict 2



    Pict 3



    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • @DontPan1k


    First of all , we need to determine whether it is a hardware or software issue.


    If you are not interested to upgrade the memory..


    Here are some of the steps to increase the performance of your computer if it is a software issue.


    Try windows + r - on the run window - type msconfig - click ok  

    click on services

    check - hide all microsoft services 

    click on disable all

    click on startup 

    disable all the startup items 

    click on apply - ok - restart the computer.   Loading process will be very fast now..


    Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab  


    Try windows + r - on the run window - type appwiz.cpl - click ok  

    it will show you the list of programs

    remove all the unwanted third party programs. 

    Please don’t remove any drivers.  

    If you are not sure , please don’t remove it.  


    Try windows + r - on the run window type temp - click ok - it will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files 


    Try windows + r - on the run window type %temp% - click ok - It will show you the bunch of files - try ctrl + a - select all files - press the shift key and click on delete files 


    If you are not able to remove some files - click on skip and then click click on continue.. 



    Try windows + r - on the run window - type cleanmgr - click ok

    click on all the boxes except recycle bin and thumnail

    Delete the items which are checked 


    Try windows x - on the menu - chose command prompt admin or power shell admin 

    click on yes 

    on the blue or black window type sfc /scannow 

    It will be running till 100 %


    Try to do a chrome reset 

    open chrome

    click on three dots on top right corner 

    click on settings

    Scroll down - go to advanced

    click on restore setting to default

    you will see reset settings - cancel

    click on reset settings 

    Open chrome 

    it will work faster now


    If it is still not working then we have to do a refresh and reset


    click on start - settings - update and security - recovery - reset this pc - get started 


    or 


    on start - type here to search - type reset this pc - click on reset this pc on the top - click on get started 


    It will show you keep my files and remove everything

    chose keep my files 

    chose the account - type the password - click on local reinstall - click on reset 

    It will be in progress.. 

    login to computer and start using the computer. 

    If it is still not working 


    click on start - settings - update and security - recovery - reset this pc - get started 

    chose remove everything 

    click on local reinstall - just remove my files - click on reset

    It will be in progress


    Note:


    If you do refresh ( keep my files ) - all your personal files like pictures, music , documents , videos will still be intact.  Only the applications will be lost


    If you do reset ( remove everything ) - you are doing a factory default.  It will become like a day one computer.  It will wipe out everything and take your computer to day one like a new computer. 



    You can also do the recovery in an alternative way..



    There are two alt keys on the keyboard. If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar. The alt key on the right side will be looking like alt, alt gr or alt car. Turn off the computer. Hold the alt key on the left and tap f10 continuously.  It will go to repair mode. It will show you chose an option, continue, troubleshoot.  If it is not going to repair mode, turn off the computer. Turn on the computer. Hold the right alt key ( alt gr or alt car or alt ) and then tap f10 continuously. It will go to chose an option continue and troubleshoot..


    It will show you chose an option, continue, troubleshoot

    Go to troubleshoot - click on reset this pc

    click on keep my files ( only applications will be lost )  chose your account and type your password  - click on local reinstall - click on reset

    It will be in progress 


    If the keep my files option is not working 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 

    It will reinstall windows. 


    If the just remove my files is not working.. 


    Go to troubleshoot - click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 

    It will reinstall windows. 


    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10 or alt gr + tapping f10 on the keyboard while turning on the computer.  Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.  Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 


    After reinstalling windows if you are facing the same issue then it is a hardware issue.

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★