My PO5-640-UB12.has power but won’t display anything?

Faded817
Faded817 Member Posts: 1 New User
edited January 2023 in Predator Desktops

I have a Predator Orion 5000 PO5-640-UB12. I just bought it Thursday. It was working fine until this evening and now it won’t display. It beeps when I press the keyboard.


[Edited the thread to add model name to the title]

Answers

  • leonaip
    leonaip Member Posts: 417 Specialist WiFi Icon

    if it is second hand, clean the RAM or replace it.

    replace the CMOS battery (use original SONY or PANASONIC)

    do a hard reset by dismantling all the attached components of the motherboard including the processor and jumpers. wait for 15 minutes before installing back all the components. always wear your anti-static wrist strap and connect it to the casing before disassembly and assembly. always use anti-static mat where you can put the dismantled sensitive components and the mobo (motherboard) itself.

    If my answers/solutions help you, please consider hitting "Like" and "Yes".

    Regards and God speed 😉


    Acer Nitro 5 AN515-58

    - Intel Core i5-12500H 12th gen Octacore ( 2.70 ghz... Turbo up to 4.50 ghz ) with p-cores and e-cores

    - 15.6 inch thin bezel IPS FHD ( 1920X1080 ) 144hz

    - RAM 8 GB DDR4 MAX 32 GB

    - SSD 512 GB Nvme

    - Nvidia Geforce RTX 3050 ( DEDICATED 4 GB GDDR6 )


  • StevenGen
    StevenGen ACE Posts: 12,487 Trailblazer

    Try to reset the mobo and bios, disconnect the power cord, then take the bios battery and ram out, leave the desktop like that for about 15min and reconnect all components and reboot, as that should reset the mobo and make your desktops image work. Also check the monitor if there are no problems with that. If that doesn't work, and as this desktop is brand new, don't do anything else to your PC and take it back to where you bought the desktop from or to Acer, as its under warranty

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    Time to switch into computer support mode... :) Any chance the video cable came loose? You should still be in warranty if there's anything actually broken, but usually it's something simple. Note that I didn't bother to ask if the power cord was still plugged in, since you get the beep. :)

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.