我的HDD硬碟可以正常使用但是一直間歇性發出運轉聲。My swift3 Hdd driver is available to use but something wrong.

teli

ORIGINAL

我買的swift3 裡面的HDD硬碟每隔40秒會伴隨運轉一次帶來噪音,HDD硬碟都可以正常讀寫之後使用crystaldisk檢查軟體也沒檢查出問題。

TRANSLATED

The HDD hard disk in the swift3 I bought will run once every 40 seconds and cause noise. The HDD hard disk can be read and written normally. After using the crystaldisk inspection software, there is no problem.

crystal.jpg

D運轉.jpg

[Edited the thread by translating from Chinese to English and added the model name to the title]

brummyfan2

你好，

能否請您發布完整的型號名稱，例如 SF3xx-xx

同時請問是否是新筆記本電腦，硬盤中是否有重要文件，是否會影響筆記本電腦的正常功能？

Hi,

Could you please post the full model name, like SF3xx-xx

also, tell us whether it's a new laptop, do you have important files in the HDD, does it interrupt the normal function of the laptop?

brummyfan2

你好，

能否請您發布完整的型號名稱，例如 SF3xx-xx

同時請問是否是新筆記本電腦，硬盤中是否有重要文件，是否會影響筆記本電腦的正常功能？

Hi,

Could you please post the full model name, like SF3xx-xx

also, tell us whether it's a new laptop, do you have important files in the HDD, does it interrupt the normal function of the laptop?

billsey

You have several Critical Warnings listed, the drive is in the process of failing.

teli

2022-12-14_110213.jpg

目前筆記型電腦已使用兩年多一點,從未撞擊過。

StevenGen

https://community.acer.com/en/discussion/676023/%E6%88%91%E7%9A%84hdd%E7%A1%AC%E7%A2%9F%E5%8F%AF%E4%BB%A5%E6%AD%A3%E5%B8%B8%E4%BD%BF%E7%94%A8%E4%BD%86%E6%98%AF%E4%B8%80%E7%9B%B4%E9%96%93%E6%AD%87%E6%80%A7%E7%99%BC%E5%87%BA%E9%81%8B%E8%BD%89%E8%81%B2-my-swift3-hdd-driver-is-available-to-use-but-something-wrong

Have a look at the Seagate ST1000LM035 Failure Symptoms below, as and if you are getting the "every 40 seconds and cause noise" symptoms then this HDD will fail soon and you will lose all your data unless you do a professional recovery,

Change this HDD NOW, as mechanical drives are prone to failure when they stop and start prematurely and make a noise, as its either their motherboards that a chip burns out and a good technician can fix and recover the drive but if its a head or the HDD SS platter than the drive can only be recovered by a professional data recovery technician that has all the expertise and software to fix and recover your data be warned that if you don't do this this HDD will FAIUL! Btw I've had a 1TB mechanical HDD with very valuable data fail also, where the platter and the read/write head was faulty and a recovery technician recovered 99% of the data but the cost was 400% of what the HDD cost, so that is cost involved which you can avoid.

Seagate ST1000LM035 Failure Symptoms

• Electrical Failure Symptoms:
• Drive is powered, but shows no sign of function;
• Disk knocking as the motor fails to spin;
• Clicking sound as the heads search or initialize;
• Mechanical Failure Symptoms:
• Clicking, grinding sounds;
• Completely quiet due to ” motor freeze”;
• “music” tone as the disk is powered up;
• Logical Failure Examples:
• Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more.
• Firmware Failure Symptoms:
• drive powers up, but is not recognised by the computer;
• Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
• Drive freezes during booting up;
• Bad Platter Area Symptoms:
• Hard disk still accessible but appear to “hang” or “sluggish”;
• Constant Cyclic Redundancy (CRC) errors;
• Unable to access folders or files which could be seen;
• Complex Failure Model

Seagate ST1000LM035 Data Recovery & HDD Repair:

• When it comes to data recovery one of the most common problems Seagate ST1000LM035 Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “Board Number” of your current circuit board in addition to the hard drive’s “Model Number “.
• 
  

brummyfan2

https://community.acer.com/en/discussion/comment/1167092#Comment_1167092

是的，它可能是硬盤故障，請備份硬盤上的所有重要數據並更換為新硬盤。

yes, it could be a failing HDD, backup any important data on the HDD and replace it with a new HDD.