what SSD can I install Acer N50-110

nolimit77

I have an Acer N50-110 DG.E1FEK.00D

i know it has an m.2 slot but will 2280 size fit? Does this motherboard support nvme?

[Edited the thread to add model name to the title]

brummyfan2

Hi,

Yes, you can install any M.2 NVMe SSD 2280.

These are few examples:

Amazon.com: OEM OEM Western Digital PC SN730 NVMe SSD 512GB Capacity Read speeds up to 3,400MB/s, Write Speed up to 2,1002MB/s Available in M.2 2280 Form Factor Endurance of up to 400 TBW : Electronics

Samsung 970 EVO Plus 500 GB PCIe NVMe M.2 (2280) Internal Solid State Drive (SSD) (MZ-V7S500), Black : Amazon.co.uk: Computers & Accessories

Samsung 980 1 TB PCIe 3.0 (up to 3.500 MB/s) NVMe M.2 Internal Solid State Drive (SSD) (MZ-V8V1T0BW) : Amazon.co.uk: Computers & Accessories

Acer Nitro N50-110 Performance Results - UserBenchmark

nolimit77

brummyfan2

Oct 30, 2022

Hi,

Yes, you can install any M.2 NVMe SSD 2280.

These are few examples:

Amazon.com: OEM OEM Western Digital PC SN730 NVMe SSD 512GB Capacity Read speeds up to 3,400MB/s, Write Speed up to 2,1002MB/s Available in M.2 2280 Form Factor Endurance of up to 400 TBW : Electronics

Samsung 970 EVO Plus 500 GB PCIe NVMe M.2 (2280) Internal Solid State Drive (SSD) (MZ-V7S500), Black : Amazon.co.uk: Computers & Accessories

Samsung 980 1 TB PCIe 3.0 (up to 3.500 MB/s) NVMe M.2 Internal Solid State Drive (SSD) (MZ-V8V1T0BW) : Amazon.co.uk: Computers & Accessories

Acer Nitro N50-110 Performance Results - UserBenchmark

Appreciated, thanks. I’m also looking at upgrading the ram. From what I know the motherboard only supports 1.2v ram, the current ram is 1.2v but runs at 3200mhz CL22. If I replaced with new ram at 1.2v 3200mhz CL19 would it still run at 3200? As apparently 1.2v only supports 2666mhz?

brummyfan2

nolimit77

Oct 30, 2022

https://community.acer.com/en/discussion/comment/1156651#Comment_1156651

Appreciated, thanks. I’m also looking at upgrading the ram. From what I know the motherboard only supports 1.2v ram, the current ram is 1.2v but runs at 3200mhz CL22. If I replaced with new ram at 1.2v 3200mhz CL19 would it still run at 3200? As apparently 1.2v only supports 2666mhz?

You should install RAM modules with same specs in both slots for them to function as dual channel memory, if you install RAM sticks with different timings they won't work efficiently.

sri369

1. If there are multiple speed RAM sticks in the different slots, the RAM will always work at lower speed.
2. Check the max speed your laptop supports; adding a RAM with higher speed than your laptop supports won't do any good; it will only at the max supported speed.
3. I have a Nitro 5 - it has two M.2 slots, but one of it has SATA written on it. Now with this written on it, it allows me place only a SATA M.2. The other slot has SATA/NvME on it and I can use my NvME on it. So the slots per your laptop specification. - Your model should support NvME too.