AN515-57-55ZS RTX 3060, i5-11400H change thermal pads and thermal paste

Redziar
Redziar Member Posts: 6

Tinkerer

edited October 2022 in Nitro Gaming

HI i want to change thermal paste and thermal pads. I have got K5-pro liquid thermal pad, normal thermal pads and krynaout extreme. My question is that where do i apply K5-pro and where normal thermal pads

Answers

  • Redziar
    Redziar Member Posts: 6

    Tinkerer

    Oh, also can i put k5-pro on everything? (vram and vrm) or only k5 pro on vram and thermal pads on vrm

  • StevenGen
    StevenGen ACE Posts: 12,610 Trailblazer

    Use the Thermal Grizzly Carbonaut high-tech carbon thermal pads and Kryonaut Extreme paste and apply only where Acer applied the pads in your AN515-57, as you don't need to apply the pads anywhere else. The K5 pro liquid is messy and unnecessary to be applied everywhere as it won't disperse heat any more than what the applied stock Acer pads do.

    Laptops are limited to how much heat they can disperse and applying lots of thermal pad paste will do nothing. You would be better off injecting cool air into the laptops enclosure to increase its crossflow ventilation by means of a tablet cooler of either a retail one or make one up if you are a DIY'er?😀

  • Redziar
    Redziar Member Posts: 6

    Tinkerer

    edited October 2022

    @StevenGen I dont mind having mess. I want my laptop to be as cool as possible. I see that Thermal Grizzly Carbonaut is only for cpu and gpu. I found someone on yt that has similar laptop. Can I apply like on this photo? Look at  lower right corner. Edit: oh i missed vrms. I Cant delete picture so i will upload another


  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,518 Pathfinder

    @Redziar you can put K5-Pro on the VRAM, the normal thermal for those chips, and Kryonaut on the GPU and CPU.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • Redziar
    Redziar Member Posts: 6

    Tinkerer

    @AnhEZ28 what length of thermal pads? I think acer has 1.5mm and 1mm (I will change in week so i dont know)

  • Redziar
    Redziar Member Posts: 6

    Tinkerer

    i meant thickness but ok

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,518 Pathfinder

    @Redziar for me, I would leave the thermal putty on the chip as it is because it is reusable. But if you want to change it, you can use 1mm pads.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!