Model Aspire TC-710
Processor Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408 Mhz, 4 Core(s), 8 Logical Processor(s)
GPU Intel (R) HD Graphics 530
OS Win 10 up to date
Bios R01-AO, 9/11/2015
Bios Mode UEFI
Upgrades with help from the community here
Added 860 EVO SATA mm2 250GB card
PSU Upgraded with new EVGA 650W Power Supply
Added PCIe x1 card for Second dive
Now my system is not used for gaming but for home security cameras. I have been upgrading my system with IA and its maxing out my CPU and I need to install a good GPU to do the work.
I know this computer has an end date but I hopping on the GPU I purchase can be moved to the new system when this happens.
I did a searched for "TC-710" and went though everything there and the best answer was measure it.
So what should I measure?
From the side to the end of the x16 slot?
From the side to the USB3F1 plug (Front panel USB 3.0 connector)?
I did unplug the USB3F1 plug (I don't use them) and the system started up with no problems so to I measure from the side to the F_PANL connector or will the card have enough clearance to go over it and I can use the whole width of the case?
Is there anything else I should consider looking at when I do the upgrade?
Thank,
Fred