Black screen and "no bootable device" A315 5ED00B

Sweden
Sweden Member Posts: 3 New User
edited August 2022 in Aspire Laptops

Acer Aspire 3 (bought less than 2 years ago). Black screen when switched on. When connected to a monitor the message "no bootable device" is displayed. Hard drive works (tested in another computer). I have tested to disconnect the battery, pressing down the on/off button for 60 sec, Windows+R, F2,F3....

Any input how to solve the problem is highly appreciated! Thank you in advance.


[Edited the thread to add model name to the title]

Answers

  • wascas
    wascas Member Posts: 1,228 Overclocked Contributor WiFi Icon
    edited August 2022

    What is the exact model name? Example AN515-56-50HK.  Is the SSD or HDD showing up in the BIOS information tab? Can you send a picture? Did you check the health of the system disk with CrystalDiskInfo?

  • Sweden
    Sweden Member Posts: 3 New User

    AC A315 5ED00B i5/8/512 (on the battery AC14B18J). The HDD does not show up. The system disk was checked in an Intel tool and it was possible to update its firmware. Can send a picture later.

  • ragsak28
    ragsak28 Ally Posts: 677

    Hi @Sweden

    You can try to do a BIOS reset to check if that makes any difference.


    How do I reset my BIOS/UEFI to default settings?

    1. Press and hold the power button for 10 seconds, or until your system shuts completely down.
    2. Power on the system.
    3. Press F9 and then Enter to load the default configuration.
    4. Press F10 and then Enter to save and exit.

    If that doesn't work then you can do a reset to check if that makes any difference.



    NOTE: Make sure to backup all the data before the reset.


    Hope it will help you in some way.

    @sdzshn3

  • Sweden
    Sweden Member Posts: 3 New User

    Thank you but unfortunately it did not work. I will have a look at recovery options in Windows.