Upgrading predator g3-710

Eko45
Eko45 Member Posts: 1 New User
Hi,

I’m a proprietor of predator g3 since 6 or 7 years. Now I want upgrade my configuration just for comfort.

i have many questions for you guys :smile:

It is possible to change the cpu cooler, because I use after effect and the cpu is very hot in intensive session ? If it’s possible what do you recommend.

second and last questions I add a 92 mm fan for air extraction near the cpu and connect on the second 4 pin. It is possible to add a third fans in the front panel of the pc and connect him with Y connector pin ? If it’s possible what is the size or recommendation ? 

Thanks acer community 

Answers

  • JackE
    JackE ACE Posts: 45,176 Trailblazer
    If the CPU cooler fan still works, the heatsink fins should be cleaned with a vacuum. Also the thermal paste and pad between the  cpu and heatsink should replaced because cooling efficiency will be greatly reduced after all these years. ArcticMX4 or Kryonaut thermal pastes are recommended.

    Adding more fans won't help much unless you also increase exhaust air vent area by cutting more holes in the case. This is not recommended.

    Jack E/NJ