Predator 8 GT-810 Battery replacement

maplebake
maplebake Member Posts: 4 New User
I have looked high and low online as to how to disassemble my Predator 8 GT-810 tablet for a battery replacement. - no luck.  If anyone could help me I'd be grateful :)

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Unless you have strong fingernails, get out your credit card to use as a wedge. Flip the tablet over and pry apart the lower left corner of the bottom cover from the top cover. Then work your way around the tablet till the covers separate. Second order of business is to immediately disconnect the battery connector from the mainboard.  Then, if your lucky, the battery pack won't be sticky taped to the chassis and should easily lift out with a little coaxing from the credit card. If sticky-taped, it might be a bit of a chore. Good luck.


    Jack E/NJ

  • maplebake
    maplebake Member Posts: 4 New User
    Thanks so much! I thought there might have been some hidden screws. The pics were perfect!
    It was tricky, especially around the 4 speakers, but I did it.  :)
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Congrats. Thanks for reporting back.

    Jack E/NJ

  • maplebake
    maplebake Member Posts: 4 New User
    Caution: It turns out there ARE hidden tiny bolts under the speaker covers on each corner.  Lift the covers off and remove the bolts before separating the case!