performance is slow and after restarting it always become better? - Nitro 5 AN515-55-50VC

raidenshogun1234
raidenshogun1234 Member Posts: 2 New User
edited March 2022 in Nitro Gaming
Low fps and low performance or stuttering in all of my games (Elden Ring, Cyberpunk, Genshin Impact, Warzone, Forza Horizon 4, Battlefield 1, etc.) during first boot up of the laptop but after I restarted it, all the games perform well.

Sometimes it's hassle to restart it, but can someone figure this out to solve my problem? Thanks in advance!
I always play my laptop plugged-in, High performance mode in NitroSense.
Graphics Settings of all games were already set to High Performance.
NVIDIA Driver is always updated and also Windows.
I also set all the games in Nvidia control panel to High-Performance NVIDIA Processor.
I have a cooling pad for my laptop as well.
NitroSense processor temp 50-72 degrees Celsius when gaming.

Model: Nitro 5 AN515-55-50VC
Specs: 1 TB  Samsung Evo 7 plus NVMe SSD
           32 GB RAM DDR4 Kingston 3200 Mhz
           i5 10300H
           RTX 3060 6 GB
           Windows 10 64 bit

[​//Edited the content to add model name]

Answers

  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    raidenshogun1234


    Here are some of the steps to speed up your computer.  

    Try windows + r -  on the run window - type msconfig  - click ok  
    click on services
    check - hide all microsoft services 
    click on disable all
    click on startup 
    disable all the startup items 
    click on apply - ok  - restart the computer.     Loading process will be very fast now..

    Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab  

    Try windows + r - on the run window - type appwiz.cpl  - click ok  
    it will show you the list of programs
    remove all the unwanted third party programs. 
    Please don’t remove any drivers.  
    If you are not sure , please don’t remove it.  

    Try windows + r - on the run window type temp - click ok -  it will show you the bunch of files -  try ctrl + a - select all files - press the shift key and click on delete files 

    Try windows + r - on the run window type  %temp%  - click ok  - It will show you the bunch of files -  try ctrl + a - select all files - press the shift key and click on delete files 

    If you are not able to remove some files - click on skip and then click click on continue.. 


    Try windows + r  - on the run window - type cleanmgr - click ok
    click on all the boxes except recycle bin and thumnail
    Delete the items which are checked 

    Try windows x - on the menu - chose command prompt admin or power shell admin 
    click on yes 
    on the blue or black window  type sfc /scannow 
    It will be running till 100 %

    Try to do a chrome reset 
    open chrome
    click on three dots on top right corner 
    click on settings
    Scroll down - go to advanced
    click on restore setting to default
    you will see reset settings - cancel
    click on reset settings 
    Open chrome 
    it will work faster now

    If it is still not working then we have to do a refresh and reset

    click on start - settings - update and security - recovery - reset this pc - get started 

    or 

    on start - type here to search - type reset this pc - click on reset this pc on the top  - click on get started 

    It will show you keep my files and remove everything
    chose keep my files 
    chose the account - type the password - click on local reinstall - click on reset 
    It will be in progress.. 
    login to computer and start using the computer. 
    If it is still not working 

    click on start - settings - update and security - recovery - reset this pc - get started 
    chose remove everything 
    click on local reinstall - just remove my files - click on reset
    It will be in progress

    Note:

    If you do refresh ( keep my files ) -  all your personal files like pictures, music , documents , videos  will still be intact.   Only the applications will be lost

    If you do reset  ( remove everything )  - you are doing a factory default.   It will become like a day one computer.    It will wipe out everything and take your computer to day one like a new computer. 


    You can also do the recovery in an alternative way..


    There are two alt keys on the keyboard.  If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar.  The alt key on the right side will be looking like alt, alt gr or alt car.  Turn off the computer.  Hold the alt key on the left and tap f10 continuously.   It will go to repair mode.  It will show you chose an option, continue, troubleshoot.   If it is not going to repair mode, turn off the computer.  Turn on the computer.  Hold the right alt key ( alt gr or alt car or alt )  and then tap f10 continuously.  It will go to chose an option continue and troubleshoot..

    It will show you chose an option, continue, troubleshoot
    Go to troubleshoot  -  click on reset this pc
    click on keep my files  ( only applications will be lost )   chose your account and type your password   - click on local reinstall  - click on reset
    It will be in progress 

    If the keep my files option is not working 

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 
    It will reinstall windows. 

    If the just remove my files is not working.. 

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 
    It will reinstall windows. 

    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10  or alt gr + tapping f10 on the keyboard while turning on the computer.    Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.    Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • raidenshogun1234
    raidenshogun1234 Member Posts: 2 New User
    raidenshogun1234


    Here are some of the steps to speed up your computer.  

    Try windows + r -  on the run window - type msconfig  - click ok  
    click on services
    check - hide all microsoft services 
    click on disable all
    click on startup 
    disable all the startup items 
    click on apply - ok  - restart the computer.     Loading process will be very fast now..

    Note: You can always enable the services and startup items later or set it to normal startup from selective startup later on the General tab  

    Try windows + r - on the run window - type appwiz.cpl  - click ok  
    it will show you the list of programs
    remove all the unwanted third party programs. 
    Please don’t remove any drivers.  
    If you are not sure , please don’t remove it.  

    Try windows + r - on the run window type temp - click ok -  it will show you the bunch of files -  try ctrl + a - select all files - press the shift key and click on delete files 

    Try windows + r - on the run window type  %temp%  - click ok  - It will show you the bunch of files -  try ctrl + a - select all files - press the shift key and click on delete files 

    If you are not able to remove some files - click on skip and then click click on continue.. 


    Try windows + r  - on the run window - type cleanmgr - click ok
    click on all the boxes except recycle bin and thumnail
    Delete the items which are checked 

    Try windows x - on the menu - chose command prompt admin or power shell admin 
    click on yes 
    on the blue or black window  type sfc /scannow 
    It will be running till 100 %

    Try to do a chrome reset 
    open chrome
    click on three dots on top right corner 
    click on settings
    Scroll down - go to advanced
    click on restore setting to default
    you will see reset settings - cancel
    click on reset settings 
    Open chrome 
    it will work faster now

    If it is still not working then we have to do a refresh and reset

    click on start - settings - update and security - recovery - reset this pc - get started 

    or 

    on start - type here to search - type reset this pc - click on reset this pc on the top  - click on get started 

    It will show you keep my files and remove everything
    chose keep my files 
    chose the account - type the password - click on local reinstall - click on reset 
    It will be in progress.. 
    login to computer and start using the computer. 
    If it is still not working 

    click on start - settings - update and security - recovery - reset this pc - get started 
    chose remove everything 
    click on local reinstall - just remove my files - click on reset
    It will be in progress

    Note:

    If you do refresh ( keep my files ) -  all your personal files like pictures, music , documents , videos  will still be intact.   Only the applications will be lost

    If you do reset  ( remove everything )  - you are doing a factory default.   It will become like a day one computer.    It will wipe out everything and take your computer to day one like a new computer. 


    You can also do the recovery in an alternative way..


    There are two alt keys on the keyboard.  If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar.  The alt key on the right side will be looking like alt, alt gr or alt car.  Turn off the computer.  Hold the alt key on the left and tap f10 continuously.   It will go to repair mode.  It will show you chose an option, continue, troubleshoot.   If it is not going to repair mode, turn off the computer.  Turn on the computer.  Hold the right alt key ( alt gr or alt car or alt )  and then tap f10 continuously.  It will go to chose an option continue and troubleshoot..

    It will show you chose an option, continue, troubleshoot
    Go to troubleshoot  -  click on reset this pc
    click on keep my files  ( only applications will be lost )   chose your account and type your password   - click on local reinstall  - click on reset
    It will be in progress 

    If the keep my files option is not working 

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 
    It will reinstall windows. 

    If the just remove my files is not working.. 

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 
    It will reinstall windows. 

    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10  or alt gr + tapping f10 on the keyboard while turning on the computer.    Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.    Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 


    I'll try to do everything and post an update here. Hope these solutions will work! Thank you so much!
  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    raidenshogun1234

    You can also try this before speeding up the computer.  


    It looks like a software issue.. 


    If it is a software issue try the following the steps..
     
    Try windows x 
    go to device manager 
    expand display adapter
    right click on display driver - uninstall 
    Restart the computer 


    It should work fine.. 


    If it is still not working 
    Uninstall the display adapter from device manager 
    Don’t restart the computer. 
    Go to support.acer.com 
    chose your country 
    type snid or chose your model 
    go to drivers 
    Install the display driver 


    It should work fine.. 



    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • BChat
    BChat Member Posts: 7

    Tinkerer

    Willing to bet you the suggestions "did not work".  No one has an answer but everyone has a suggestion.  Placebos are a computers best friend!
  • GAMING6698
    GAMING6698 ACE Posts: 7,774 Pathfinder
    Well disable fast Startup and uninstall msi afterburner to solve this problem 
    windows 10/11 optimization guide for gaming 
    Windows 10/11 optimization guide for gaming — Acer Community

    My AN515-43 laptop UserBenchmark-
    https://www.userbenchmark.com/UserRun/51514566