Help!!! Nitro 5 AN515-53 black Screen, No Logo, No WindowsBoot Or Bios

Jukeman_IronWulf
Jukeman_IronWulf Member Posts: 1 New User
edited March 2022 in Nitro Gaming
Ok so I have a Acer Nitro 5 AN515-53. I updated everything the other day on windows 10. Had an optimal update for bios. It installed and was running as normal. I went to go and boot up my virtual machine and it wouldn’t load. I go into bios and re turn on virtualization. Saved it and after restart. Boom. When I turn on it’s just a black screen, no logo, no windows boot and can’t access the bios. Just turns on then after a minute restarts itself.  

 I’ve tried just about everything you could to fix. 
- tried the battery reset nope same I Open up took out battery Then turned on still the same

- Tried every Key sequence get the same, I tried plugging into a monitor nothing pulls up left on all night
- tried replacing all hard ware new hdd l, new ssd, new ram and still get nothing. 
- even tried doing a bios recovery with Ian holding esc and fn and turning on.  Wouldn’t even pick up usb. 

I’ve done just about everything I could try even replacing the thermal paste on the board since it’s out of warrenty . Idk if I’m just setting up the bios recovery usb wrong or what. But I turn it on it and then about a minute or so later shuts off. Sometimes it says on and I plug in leave ima while try fn f5 for source. And still out of luck. Any help would be great. 

(Thread was edited to add model name to the title)



Answers

  • Do not try to recover the bios as this could make the situation worse. Try just unplugging the Lition battery, RTC battery from the BIOS and then press the power button for thirty seconds.

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @Jukeman_IronWulf,

    # Try to get the BIOS page.
    1. Turn OFF the unit.
    ​2. Press and hold the F2 key and turn on the unit. 
    3. You will be in setup utility page. 
    4. Once you got the screen release the F2 key.
    5. Tap on F9 key and hit enter key without changing the option.
    6. Tap on F10 key and hit enter key without changing the option.
    7. Your unit will restart by itself. 

    Check this T/S and post the result. ​