I lost a tiny screw from the bottom of my laptop, an Acer Spin, model SP111-33-C58B.

jgkwiatek

I lost a tiny screw from the bottom of my laptop, an Acer Spin, model SP111-33-C58B, though I think SP111-33 is sufficient to identify this laptop. It is one of ten tiny screws on the bottom-side around the perimeter that hold the bottom cover in place. Any suggestions on where I can obtain such a screw?

When my laptop is open, the right-side hinge is straining to keep the screen up because the missing screw is in that corner where the hinge is.

(​//Edited the content to add model name)

ttttt

@jgkwiatek

How about buy something like this:

https://www.amazon.com/dp/B07TDHZJLL/?coliid=I2C9KWV47D9C6M&colid=1E0PSG9CALTDD&psc=1&ref_=lv_ov_lig_dp_it

Need not be this specific one set.

You can save some troubles in the future in case you lost another screw again., or you don't need to contact Acer and wait for their reply.

ttttt

@jgkwiatek

How about buy something like this:

https://www.amazon.com/dp/B07TDHZJLL/?coliid=I2C9KWV47D9C6M&colid=1E0PSG9CALTDD&psc=1&ref_=lv_ov_lig_dp_it

Need not be this specific one set.

You can save some troubles in the future in case you lost another screw again., or you don't need to contact Acer and wait for their reply.

billsey

There are two different screw sizes holding the cover halves together. Six are M2x5.7mm and four are M2x3.5mm. The shorter ones are along the front edge.