How to fix no driver found in windows installation from usb An515- 57

sahib123
sahib123 Member Posts: 18 Troubleshooter
An515-57  i resetted my pc and it got stuck at logo... now i wanted to install windows from usb drive but its showing no driver found basically none of my harddrive or ssd is showing while choosing disk in installation process..even my touch pad isnt working im using external mouse. There are some stupid methods on internet none seems to be working even that command prompt method diskpartition only my usb drive is showing there. I think i dont have any installed driver for my hdd and ssd. Please help

Answers

  • Leostat
    Leostat ACE Posts: 3,043 Pathfinder
    11th gen intel right? You need to use the VMD driver from https://www.intel.com/content/www/us/en/download/19512/intel-rapid-storage-technology-driver-installation-software-with-intel-optane-memory-10th-and-11th-gen-platforms.html

    Unzip it and drop it to the install usb stick. When on the disk seletion, i think at the bottom it says click to load drivers or something like that. Select the folder you put on the USB, it should rescan and find the drive

    If its the 10thgen or 9th gen its the non VMD driver

    If that doesnt work you can turn VMD off , but it slows the drive down and uses more power so i dont recomend that
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    (1) Press and hold power button till the laptop shuts off.
    (2) Unplug charger. Insert paperclip into reset pinhole on bottom for about a minute.
    (3) Plug charger back in but wait for battery charge LED to turn steady blue.
    (4) After turning steady blue turn machine on and immediately start tapping F2 key to enter the BIOS menu
    (5) In the BIOS Main tab, make sure the F12 and D2D options are enabled.
    (6) In the BIOS Security tab, set a supervisor password.
    (7) In the BIOS Boot tab, disable secure boot.
    (8) Press F10 to save settings and exit.
    (9) If machine doesn't start normally, then press and hold power button again till machine shuts off
    (10) Turn the machine back on and immediately press and hold the ALT key while tapping the F10 key.
    (11) A menu should appear with troubleshooting option that will allow you to reset the system to a factory fresh state

    Jack E/NJ