S271HL OSD turning on and off

agoramilio
agoramilio Member Posts: 5

Tinkerer

Hey all,

I have a S271HL monitor that recently (over the last couple days) has been having the on screen display randomly popping on and off. I didnt even know there were buttons other than the power button on the monitor until this came up. I've found that pressing one of the buttons and holding it down turns it off, but I havent been able to find a way to permanently push that button. I have had the monitor for probably 4 years, and it has worked flawlessly until now. I attached a picture of what I am talking about.

Answers

  • agoramilio

    Try to do power drain test on your monitor.. 

    Unplug all the cables from the monitor
    If the cable is inbuilt please don't try to remove it.  
    Hold the power button for 1 minute
    Plug all the cables back.
    Turn on the monitor and check..

    If it is not working fine ..

    Using the control buttons on the monitor try to reset the settings to defaults and then check..   It should work fine..


    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @agoramilio,

    What cable is connected with it HDMI or VGA ?
  • agoramilio
    agoramilio Member Posts: 5

    Tinkerer

    agoramilio

    Try to do power drain test on your monitor.. 

    Unplug all the cables from the monitor
    If the cable is inbuilt please don't try to remove it.  
    Hold the power button for 1 minute
    Plug all the cables back.
    Turn on the monitor and check..

    If it is not working fine ..

    Using the control buttons on the monitor try to reset the settings to defaults and then check..   It should work fine..



    Looks like this worked! Thanks, and ill keep it in mind if it ever pops up again!
  • agoramilio
    agoramilio Member Posts: 5

    Tinkerer

    Easwar said:
    Hi @agoramilio,

    What cable is connected with it HDMI or VGA ?

    HDMI, and it is still happening after power drain test
  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi @agoramilio,

    Did you connect this monitor to other device and check. 
  • agoramilio
    agoramilio Member Posts: 5

    Tinkerer

    hi all. I have a new symptom. This is starting to show up. Should I cut my losses and buy a new monitor, or is this fixable? Thanks.
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Any chance you have a sticky button?
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • agoramilio
    agoramilio Member Posts: 5

    Tinkerer

    billsey said:
    Any chance you have a sticky button?

    nope. the buttons work fine.