Help needed reset aspire 3 A315-21-4542

Shelby19x
Shelby19x Member Posts: 2 New User
edited October 2021 in Aspire Laptops
I recent my Acer aspire 3 A315-21-4542 and when I tried to set it back up it’s taking me to automatic repair. 
When clicking advanced options and continue to windows 10 (on volume 3) it’s not installing, it takes me back to the automatic repair. 
How can this be solved? Needing it repaired ASAP 

Any help and advice appreciated 

Thread was edited to add model name to the title


Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Try running thru these steps.

    (1) Press and hold power button till laptop shuts off
    (2) Unplug charger. No LEDs should be lit.
    (3) Insert paper clip into reset pinhole on bottom for about a minute
    (4) Plug charger back in and wait till battery charge LED turns to steady blue
    (5) Turn laptop back on and immediately press the F2 key to enter the BIOS menu
    (6) Press F9 in the BIOS menu to load defaults. Press F10 to save defaults and exit the BIOS menu
    (7) Laptop should start Windows login normally.

    Jack E/NJ

  • Shelby19x
    Shelby19x Member Posts: 2 New User
    Thanks for the help! I have tried what you’ve suggested and unfortunately it’s went to recovery and says I need to have a usb or contact pc/device manufacturer 
  • Easwar
    Easwar Member Posts: 6,727 Guru
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Go to this link the create a free USB Win10 installation and recovery USB stick. Insert the stick, turn the machine on, and immediately start tapping the F12 key to see if a menu appears to allow us to use tools to repair the drive. If not, then we have make some changes in the BIOS menu to allow the recovery USB stick to initialize and boot for the repair. Report back when you're ready.

    Jack E/NJ