A317-53-55MB Drivers installation

ivan_q
ivan_q Member Posts: 4 New User
edited October 2021 in Aspire Laptops
Hi.
I have an A317-53-55MB laptop. Installed Win10 x64. After all drivers installation i still have 3 unrecognized devices. No videoadapter, no audiocontroller and something else.
I tried to install factory drivers from ssd (volume WINDRIVERS) 
Tried to install drivers from Acer Support https://www.acer.com/ac/ru/RU/content/support-product/8901?b=1&pn=NX.AD0ER.00B
Tried to use "Intel Driver & Support Assistant"
Tried to update bios firmware from 1.16 to 1.17
Tried another image of Win10x64
Its still the same 3 unrecognized devices.
Btw i can't boot laptop with "VMD controller" Enabled in BIOS settings. I'm not sure is this ok?
3 unrecognized devices are:
1.PCI\VEN_8086&DEV_A0E0&SUBSYS_149D1025&REV20
2.PCI\VEN_8086&DEV_A0C8&SUBSYS_15581025&REV20
3.ACPI\VEN_INTC&DEV1051

How can i find drivers for this devices? Or what should i do to install current drivers properly?
Thanks in advance

Best Answer

  • ivan_q
    ivan_q Member Posts: 4 New User
    Answer ✓
    This application doesnt look like trusted software. Are you sure about it? The only reason why i used "Driver Booster" - I would format drive anyway.
    It didn't find any drivers. 
    1.16 and 1.17 BIOS has no options to enable AHCI mode. But Windows installer didnt see SSD with VMD Enabled. So i think that "VMD" option control AHCI in some way. Also "VMD" option doesnt available by default. You should press "Ctrl+S" in the BIOS Main tab to unlock it. 

    I tried to use another one(third) image of Win10x64. It was  Win10_21H1_Russian_x64.iso for this time. And it helped. Factory drivers from SSD are enough with this image. The previous images was based on windows_10_2016_ltsb_x64.iso - it is too old for this hardware =(

    The problem is solved. I hope it will help someone. Thanks for advices, JackE. Отдельное спасибо за ответ на русском=)

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    What was the original factory installed operating system if any?

    Jack E/NJ

  • ivan_q
    ivan_q Member Posts: 4 New User
    No OS from factory. UEFI Shell
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    edited October 2021
    Если Win10 был установлен в режиме BIOS AHCI SATA, VMD должен оставаться отключенным.

    Сначала попробуйте загрузить и установить бесплатное программное обеспечение Driver Booster от iobit, чтобы увидеть, сможет ли оно найти что-нибудь в сети для адресации нераспознанных устройств.


    If Win10 was installed in BIOS AHCI SATA mode, VMD should stay disabled.

    First try downloading and installing iobit's Driver Booster freeware to see if it will pick up anything on line to address the unrecognized devices.



    Jack E/NJ

  • ivan_q
    ivan_q Member Posts: 4 New User
    Answer ✓
    This application doesnt look like trusted software. Are you sure about it? The only reason why i used "Driver Booster" - I would format drive anyway.
    It didn't find any drivers. 
    1.16 and 1.17 BIOS has no options to enable AHCI mode. But Windows installer didnt see SSD with VMD Enabled. So i think that "VMD" option control AHCI in some way. Also "VMD" option doesnt available by default. You should press "Ctrl+S" in the BIOS Main tab to unlock it. 

    I tried to use another one(third) image of Win10x64. It was  Win10_21H1_Russian_x64.iso for this time. And it helped. Factory drivers from SSD are enough with this image. The previous images was based on windows_10_2016_ltsb_x64.iso - it is too old for this hardware =(

    The problem is solved. I hope it will help someone. Thanks for advices, JackE. Отдельное спасибо за ответ на русском=)
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Thanks for reporting back.

    Jack E/NJ

  • ivan_q
    ivan_q Member Posts: 4 New User
    This application doesnt look like trusted software. Are you sure about it? The only reason why i used "Driver Booster" - I would format drive anyway.
    It didn't find any drivers. 
    1.16 and 1.17 BIOS has no options to enable AHCI mode. But Windows installer didnt see SSD with VMD Enabled. So i think that "VMD" option control AHCI in some way. Also "VMD" option doesnt available by default. You should press "Ctrl+S" in the BIOS Main tab to unlock it. 

    I tried to use another one(third) image of Win10x64. It was  Win10_21H1_Russian_x64.iso for this time. And it helped. Factory drivers from SSD are enough with this image. The previous images was based on windows_10_2016_ltsb_x64.iso - it is too old for this hardware =(

    The problem is solved. I hope it will help someone. Thanks for advices, JackE. Отдельное спасибо за ответ на русском=)
  • Easwar
    Easwar Member Posts: 6,727 Guru
    ivan_q,

    Good to know thanks for your information. It will be useful for many people.