Fix Blackscreen issue and some other errors Aspire A515-56G

Chandashoka123
Chandashoka123 Member Posts: 45 Troubleshooter
edited October 2021 in Aspire Laptops
My laptop is Acer Aspire A515-56G laptop and at july 22 I updated my laptop and these are the 2 updates I got on settings>windows update>check for updates
                                                                                       01:Intel Corporation - Display - 27.20.100.9664
                                                                                       02:Intel Corporation - Extension - 27.20.100.9664
And after the update laptop went to blackscreen and I made it from my warrenty. But now sometimes laptop may be slow and chrome and edge also stucking when it open in first time when I on the laptop. I don't know why was that because befor this black screen issue It's not like that and chrome and edge also fast. but now sometimes it is running slow and chrme and edge also stucking. What should I do for this? Please help me?

Best Answer

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Answer ✓
    (1) Open Control Panel. Search 'button'. Click 'change what power buttons do' in left pane. Click 'change settings that are currently unavailable' Scroll down and make sure box for fast startup is NOT checked.
    (2) Shut down Windows normally.
    (3) Unplug charger.
    (4) Insert and hold paperclip into reset pinhole on bottom for a minute or two.
    (5) Plug charger back in
    (6) Turn machine on and immediately press F2 key to enter BIOS menu
    (7) Press F9 to load BIOS menu defaults.
    (8) Press F10 to save default settings and exit BIOS menu
    (9) Windows should start. Test speed again

    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Answer ✓
    (1) Open Control Panel. Search 'button'. Click 'change what power buttons do' in left pane. Click 'change settings that are currently unavailable' Scroll down and make sure box for fast startup is NOT checked.
    (2) Shut down Windows normally.
    (3) Unplug charger.
    (4) Insert and hold paperclip into reset pinhole on bottom for a minute or two.
    (5) Plug charger back in
    (6) Turn machine on and immediately press F2 key to enter BIOS menu
    (7) Press F9 to load BIOS menu defaults.
    (8) Press F10 to save default settings and exit BIOS menu
    (9) Windows should start. Test speed again

    Jack E/NJ