ok i removed the wifi card but i lost my screw for the wifi card po-620

playz10
playz10 Member Posts: 1 New User
i lost it but when i tryed to pug it in the small cables i hate the small cables i hate the small cables so can i just use it without the screw

Best Answer

  • billsey
    billsey ACE Posts: 31,621 Trailblazer
    Answer ✓
    The M.2 connector will push the card up at an angle which won't give good contact. You might just have intermittent problems or you might short the card out. Just hit up a local computer repair depot or Amazon for M.2 mounting screws. They are M2x3mm with a wide head.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • GotBanned
    GotBanned Member Posts: 611 Seasoned Specialist WiFi Icon
    Unless the screw is used to ground the component, which I doubt, I see why not? Try and see if it works.

    You may want to use tape or double-sided tape to secure the WiFi card in place, if the screw is only used for securing the card.
  • billsey
    billsey ACE Posts: 31,621 Trailblazer
    Answer ✓
    The M.2 connector will push the card up at an angle which won't give good contact. You might just have intermittent problems or you might short the card out. Just hit up a local computer repair depot or Amazon for M.2 mounting screws. They are M2x3mm with a wide head.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.