nitro 7 How to care for a dying laptop fan??

UzairSaiyed
UzairSaiyed Member Posts: 31 Enthusiast WiFi Icon
edited May 2021 in Nitro Gaming
I have acer nitro 7, and a few months back, I had a problem with my fan speed and it was jammed, so I got it serviced and now again a few days ago, the fan jammed again and I got it serviced, and they lubricated the axle of fan and now it spins fine, but I think that I might run into the same problem again, so I need help from you guys on how can I increase life of my laptop fan, also does someone know how can I access propeller and bearings so that I could lube it as a temporary solution.......

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,277 Pathfinder
    I'm not sure what your model is, but you can search that model with a disassembly video. Once you have opened the back cover, prepare yourself a Thermal Paste because you have to take out the heatsink first then you can take the fan out.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • UzairSaiyed
    UzairSaiyed Member Posts: 31 Enthusiast WiFi Icon
    @AnhEZ28 already cleaned it a couple of times, but it's jammed and I don't know how to lube it, I even removed those tiny screws and exposed fan propellers but I don't know where to apply lubricant, anyways I have acer nitro 7 2019
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,277 Pathfinder
    Acer Nitro 5 AN515-43 AN515-54 Nitro 7 AN715-51 CPU  Gpu Cooling Fan  eBay
    If you have your fan like this, you can just take the blade out by pulling it straight up and apply lubricant inside the bearing.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • UzairSaiyed
    UzairSaiyed Member Posts: 31 Enthusiast WiFi Icon
    @AnhEZ28 yes the fans look like this, but when I tried to pull it out, it didn't come out ,  I did apply adequate pressure to pull it out but it didn't come out, so any suggestions on how can I remove it??
  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,277 Pathfinder
    You can take the sticker in front it to see if anything is holding the bearing.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • UzairSaiyed
    UzairSaiyed Member Posts: 31 Enthusiast WiFi Icon
    @AnhEZ28 sticker is at the bottom of the fan and I don't know if something holds onto the fan, I would like to know that, if someone knows how to remove the propellers so that I could lubricate it