About temperature - A717-72G-76v1

espacio
espacio Member Posts: 10

Tinkerer

edited March 2021 in Aspire Laptops
Hello. I have A717-72G-76v1 (8750h, GTX1060 6GB, 16GB RAM). The last six months have a constant temperature of 95c after 5-10 minutes of gaming. I cleaned it many times, changed the thermal paste, made the processor downvolt (-125v, operating frequency 3400Mhz). In the afterburner I tried different downvolts, both at low frequencies, and at high and medium. Set the lowest settings in games, set a lower resolution (1920-1080 -> 1366-768). Nothing helps. After 5 minutes, the temperature again rests at 95s and the frequency and FPS begin to drop. Is this a bug or a feature of this laptop? Share how someone deal with it

​​​​​​​​​​​​​​​​//Edited the content to add model name on title.​

Answers

  • espacio
    espacio Member Posts: 10

    Tinkerer

    And by the way, ArcticMX4 thermal paste is used
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Do you have any non-Microsoft virus scanners running in the background? Also please post a screenshot of TaskManager startup tab if possible. Jack E/NJ

    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    JackE said:
    Do you have any non-Microsoft virus scanners running in the background? Also please post a screenshot of TaskManager startup tab if possible. Jack E/NJ
    No, dont running anti virus

  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    What does Task Manager Performance tab show with no gaming? Jack E/NJ

    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    JackE said:
    What does Task Manager Performance tab show with no gaming? Jack E/NJ
    Its going pretty well. Everything changes when start any game with any settings
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Both fans should be running over 5000 rpm at gaming temperatures above 90*C. This would sound quite loud at ~600Hz for 6-blades with distinct beat frequencies like a model drone. Does it sound like both fans are running OK at these high speeds? Jack E/NJ


    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    It sounds like I'm sitting on the runway, they work very loudly. Unfortunately, it is not possible to change the rotation speed on this laptop model.
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>>last six months have a constant temperature of 95c after 5-10 minutes of gaming.>>> changed the thermal paste>>>ArcticMX4>>>[fans] work very loudly.>>>

    How far above hard surface does laptop typically sit while gaming?  Jack E/NJ





    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    JackE said:
    >>>>last six months have a constant temperature of 95c after 5-10 minutes of gaming.>>> changed the thermal paste>>>ArcticMX4>>>[fans] work very loudly.>>>

    How far above hard surface does laptop typically sit while gaming?  Jack E/NJ





    Its staing on table. Try to lift a lit bit, but dont see any difference
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Seems like heat sinks are not making good thermal contact with processors. Please describe how you removed old paste & applied ArcticMX4. Jack E/NJ

    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    Its hard to explain, on hodidays try to make a foto. And how you would recomend to apply paste?
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    For a thermal paste, I  apply a  large dollop in the middle of both the processor and heat sink. Then press them together while twisting to help spread the paste evenly before tightening with screws. I don't worry about excess paste oozing beyond the processor perimeter onto the mainboard and nearlby components.

    For a thermal putty, I knead and press/make a thin sheet with my fingers. Then cut it to the shape of the the cpu with a scissors. Then tighten heatsink with screws. Again, I don't worry about excess putty that is squeezed out.

    Jack E/NJ

    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    Thanks. Last time a put a large amount of paste. How do you think, it can be a problem that causes thermal heating?
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    It should be OK if spread evenly and heatsinks moderately tight against cpu & gpu. However, overheating is possible If heatsinks are loose or not even with top of processor. I think might be useful to paste again. Rising above 94*C so quickly suggests that thermal conduction between the CPU and heatsink surfaces is not very good. Jack E/NJ

    Jack E/NJ

  • espacio
    espacio Member Posts: 10

    Tinkerer

    Problem was solved. Undervolting CPU, GPU, changing thermopaste doesnt help. Solution was in : the radiator had to be disassembled and cleaned. The dust was removed only externally, but did not look inside. Now the temperature under very heavy loads is 78-80c. Black streaks are lumps of dust, that was the problem
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    Congrats on finding the dust and debris problem. Thanks for reporting back. Jack E/NJ

    Jack E/NJ