Please help me figure out what my problem is Acer Nitro N50-600G

ASahota97
ASahota97 Member Posts: 1 New User
edited January 2021 in Nitro Gaming
I have the Acer Nitro N50-600G desktop and had performed a ram upgrade. As soon as I turned it on I didn't receive any video signal so I took out the CMOS battery and waited 10 minutes to clear the CMOS that didn't work either and I even tried with the original ram stick. It also makes a loud whining whenever I turn it on even without the CMOS battery and every ram configuration.

Best Answer

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,490 Pathfinder
    Answer ✓
    1. Take out any ram that you have on the motherboard.
    2. Clean those pins and try with original stick first. Also put your CMOS battery to see if it's work.
    3. If it doesn't work, unplug the power cable and press the power cable a few times. Wait about 5 mins and try again.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,490 Pathfinder
    Answer ✓
    1. Take out any ram that you have on the motherboard.
    2. Clean those pins and try with original stick first. Also put your CMOS battery to see if it's work.
    3. If it doesn't work, unplug the power cable and press the power cable a few times. Wait about 5 mins and try again.
    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!