RAM not working properly Acer Nitro N50-600

doktorn
doktorn Member Posts: 7 New User
edited November 2023 in 2020 Archives
Hey, I upgraded my RAM but only one of the two sticks shows up and it runs at 2133 Mhz instead of 2666 Mhz. Doesn anyone know how to change that? I have an Acer Nitro N50-600 PC btw.


Thread was edited to add model name to the title


Answers

  • batmalin
    batmalin Member Posts: 4,231 Guru
    Download and run CPU-Z and provide screenshot of the SPD tab for each module.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • doktorn
    doktorn Member Posts: 7 New User

    I got both sticks to work but they still only run at 2133 Mhz when they should be at 2666 Mhz, the RAM I replaced them for did run at 2666 Mhz.
  • batmalin
    batmalin Member Posts: 4,231 Guru
    edited November 2020
    They ether can run @2133 or @3200 but only if you you have enabled XMP in BIOS(if that is available anyway). So now they are running at the max supported JDEC profile. What is the CPU model? BTW for dual channel you better use slot 2&4 or 1&3
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • doktorn
    doktorn Member Posts: 7 New User
    Hmm, can they not run at 2666Mhz since that's what the MB supports? and I thought I put them into slot 2&4 since they're not next to eachother inside the PC. 
  • batmalin
    batmalin Member Posts: 4,231 Guru
    It`s not because of the MB but because the ram doesn`t have  2666 JDEC profile. Memory controller is build in the CPU. Slot 2&4  and 1&3 are the right one for dual channel.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158