Is there DETAILED instructions available to tear down a PH517-61 system for RAM replacement??

GlitchedAtBirth
GlitchedAtBirth Member Posts: 18 Troubleshooter
edited November 2023 in 2020 Archives
OK, so I recently purchased 2 sticks of Hyper X 32gb 2666 cl16 AND a Killer 1650 WiFi card (to replace the standard 1550) and need to be able to tear down the whole system in order to 1) reach the 2 original RAM sticks to remove them.  I only want the 64 gb total from my new RAM sticks since I'm fully aware of how it will downclock if I populate all 4 slots and want the full 2666 speed, which is only possible for Rank 2 RAM if it populates only one channel, and not both.  If I decide to try 128gb and am willing to take the speed hit, I can always still do it later.  The second reason for the tear down is since I can't replace the original Killer WiFi card without removing the heatsink also, so I'm going to do both at the same time.  I'm VERY lucky to live in a town with Fiber cable internet, so I can take advantage of the speed boosts afforded by the wifi 6 standard.  Just wanted to get that out of the way before the flood of comments came of how upgrading wouldn't benefit me since most high speed internet doesn't offer the bandwidth to make a difference.  Just wanted to ***** that in the bud from the get go..  Anyway, I've been skulking on this and many other sites for a while and haven't found any DETAILED tear down instructions or diagrams.  About the best I've found was a post with a photo from a tech manual explaining to remove the heatsink screws numbered 7 backwards to 1, but that's about the most of it.  Was hoping to find something with details on the connections, where they are located, if any require special "techniques" to disconnect/reconnect them, etc... I'm no stranger to disassembling computers, HOWEVER it has been about 10 years since I last did any real work in this area and just want to make sure I don't miss anything or forget something, or if I come across any new standards that I'm unfamiliar with..  Just want to cover all my bases since I'm out of practice and don't want to assume that it'll all just "come back to me" and that I won't bungle something stupid up that I wouldn't have back then..  Any help would be greatly appreciated.

Oh, and just to mention, not sure exactly how, but I was able to get the "Tuning" page on the Radeon Adrenaline software to become available to me..  I've read how most use MSI Afterburner and other various programs to adjust their GPU since the Adrenaline program has this locked out, but on my system, after doing various tweaks, it suddenly just appeared, out of nowhere suddenly...  Just wanted to make known to any interested Helios 500 Ryzen owners..  I can do my best to explain what I did if anyone is interested...  I'm using version 20.7.1 if you're curious about that...