cpu and memory utilisation 100% Predator G3-710

Alfred888
Alfred888 Member Posts: 7

Tinkerer

edited February 15 in 2020 Archives
I am using desktop Predator G3-710 with 16GB memory and i7-6700 CPU @3.40ghz
When I run a vray rendering (graphic rendering app) the CPU and memory utilisation hit 100% and the process took a few hours to complete. May I know how I could upgrade the CPU and/or memory to improve the performance?

Thanks

Answers

  • billsey
    billsey ACE Posts: 34,291 Trailblazer
    Your CPU is pretty close to maxed out, the i7-6700K doesn't give much of a boost, and that's the highest end CPU supported with the MB. Memory on the other hand... You can go up to a max of 64GB of ram, here's the matrix:
    The chipset supports 2400MHz memory, so stick with that and go as big as your wallet allows. Rendering will take every bit you have, so the more the merrier. When there's not enough to cover the minimum requirements for the image, it's swaps some out to disk, causing the huge delays you see.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.