Which ssd is good for tc780?

Underwonder
Underwonder Member Posts: 5 New User
edited March 1 in 2020 Archives
Hey i have acer tc780 i5 7400

i have bought a ssd from sanddisk ssd plus how do i know that the ssd is connected. CAn someone tell me if this ssd is good for this pc? 
I have connected to the pc this but in the bios i dont see anything?

Answers

  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @Underwonder
    I suppose you have connected the SATA3 connector and the power connector properly and the SSD is not defective.
    In the BIOS, there are two places you can see the SSD.
    1) Under the Integrated Peripheral section, it should show the SATA Devices
    2) At the Boot tab, close to the bottom, see under HDD priority 

    In Windows 10 Task Bar search field, type "Disk Management " , go there you may see the SSD (probably uninitialized yet but should be there).
  • Underwonder
    Underwonder Member Posts: 5 New User
    I see this? But i conntected properly but i hear no sound of working through ssd? When i turn my hdd he recognize immediately. 
  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @Underwonder
    A SSD creates no sound, as it runs electronically, unlike a spinning HDD that generates sound and you know right away it is running. You will feel a little bit of warmth when touching the SSD, but it is still much cooler than the traditional HDD.

    I am surprised to see everything is "Not Installed" under the Advanced Tab. I believe the TC-780 motherboard has 2 SATA ports and one M.2 port. One SATA port is already used for the DVD drive, the other port is probably used with the original HDD. Is the BIOS  Advanced Tab showing the same thing( Not Installed) with the original HDD setup
    I have seen people adding a SSD to this TC-780, read this link:
    https://community.acer.com/en/discussion/581225/ssd-upgrade-acer-aspire-tc-780-desktop
    I hope you are not having a defective SSD.
    Try to set the Onboard SATA Mode to RST-Optane from AHCI and see it will make any difference, but I doubt it.
    If things still don't work out, I'll return this SSD and get a M.2 SSD to the unused M.2 port.
    Go to https://www.userbenchmark.com/
    Run a test there and find out what kind of SSD can be used for the TC-780.
    If TC-780 can use a PCIe 3.0 x4 M.2 NVMe SSD, it will be the best choice as it is like 5-6 times faster than the 2.5" SATA3 SSD that you purchased and you have an additional faster drive while keeping the original HDD as data drive. A M.2 SATA SSD just runs as fast as a regular 2.5" SATA3 SSD.

    Note: To install the M.2 NVMe SSD, you may need to remove the DVD drive first to access the M.2 port
  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
  • Underwonder
    Underwonder Member Posts: 5 New User
    Oke but what i must do now? I have already bought this ssd. I dont get it why it dont work? I have no OS. I can only into the Bios and nothing else.
  • ttttt
    ttttt Member Posts: 1,947 Community Aficionado WiFi Icon
    @Underwonder,
    I would presume the SSD is defective. Get a refund if possible and apply the money for a M.2 NVMe SSD.

    Note: To use a M.2 NVMe SSD, I would suggest buying an EXTERNAL USB3.0 SATA3 HDD for future transfer of the OS from the HDD to the M.2 NVMe SSD using Win 10 "Create Image File" method storing the image to this external disk and restoring the image file later.
  • Underwonder
    Underwonder Member Posts: 5 New User
    Okay but what is the best solution for in the future. Is a M2 ssd nvme a niche product for particular motherboard or it is a common thing for new generation. I search a sustainable way. I have returned the sanddisk. So i have now option too choose which disk im gonna buy
  • Underwonder
    Underwonder Member Posts: 5 New User
    I forgot too say. What difference nvme and m.2 sata? And can both use a boot disk too run my OS on it. Linux or Windows
  • billsey
    billsey ACE Posts: 34,291 Trailblazer
    NVMe is the newer standard interface for M.2 format drives. It uses PCIe x4 lanes which gives around double the speed of SATA3 or PCIe x2. Most new systems use it, and it'll be the standard for some times to come.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.