Acer Nitro 5 "AN515-44-R99Q" RAM upgrade

2»

Answers

  • StevenGen
    StevenGen ACE Posts: 12,174 Trailblazer
    edited May 2021
    Sighless said:
    I have recently purchased an Acer Nitro 5 "AN515-44-R99Q", and have looked through this forum (https://community.acer.com/en/discussion/605107/an515-44-r99q-ram-upgrade) to see if I could upgrade the RAM to run 2x8gb dual channel at 3200. However, there was no clear answer of whether I could simply get another 8gb stick or if I have to go with a completely new 2x8gb set. A friend said I needed to get a new set if I wanted to use dual channel as the Acer RAM that comes with the R99Q model is not dual channel compatible with any other RAM, and Acer does not sell it. So my question is, to achieve 2x8gb 3200 dual channel memory, do I need to get a new 2x8gb set or would one 8gb stick be compatible with the current RAM? In your answer would you also leave links to whatever products you recommend? (I currently don't have the laptop yet so I can't verify what specific RAM the laptop has) Thankyou in advance.
    Sighless, your Nitro 5 "AN515-44-R99Q" can take these specs of memory.

    The OEM memory that you have is a Kingston ACR32D4S2S1ME-8 8GB (Description: PC4-25600, 1.2V, CAS Supported: 10 11 12 13 14 15 16 17 18 19 20 21 22 24) you can get it on eBay or Amazon or some memory retailers on the web, if you can't get a similar with the specs above of this memory (doesn't have to be the same manufacturer) so that you can add that 1x 8GB DDR4-3200MHz module into the 2nd slot so that you have 16GB total and in dual channels, its a simple combination and procedure.

    Note: if you can't match the OEM memory the best combinations for "Dual Channels" e.g. 2x 8GB DDR4-3200MHz or 2x 16GB DDR4-3200MHz is to buy a kit as these modules are matched by the manufacturers and perform best in pairs.