problem with my predator sense - PH315-52

ajay_casi

And the temperature is reaching 90% while using 3d softwares like after effect or similar softwares or while playing games(without undervolt)

xapim

As i said optimise your windows properly and undervolt it further with TS  if your temps still high its still a bad repaste only a thin layer covering both diodes its enough and you will probably will have high temps using rendering software as it stresses out the cpu/gpu a lot also make sure your ram its in dual channel 16gb minimum but for rendering i would get 32gb either hyperx of vengeance

ajay_casi

xapim said:

As i said optimise your windows properly and undervolt it further with TS  if your temps still high its still a bad repaste only a thin layer covering both diodes its enough and you will probably will have high temps using rendering software as it stresses out the cpu/gpu a lot also make sure your ram its in dual channel 16gb minimum but for rendering i would get 32gb either hyperx of vengeance

I have single channel ddr4 16gb 2666mhz hk hynix ram but I'm planning add a same model hk hynix16gb stick

xapim

ajay_casi thats not good you need dual channel i wouldnt use the stock ram at all they are manufacturer proprietary the cl speeds arent easy to match unless you manage to buy another used sodimm from someone else as i said the only ram i recommend its hyperx or vengeance its the best you can get especially for your type of work which requires fast ram

pulkitking24

for Vram i am using 0.5 mm and for other part i am using 1 mm

ajay_casi

pulkitking24 said:

for Vram i am using 0.5 mm and for other part i am using 1 mm

What xapim saying is use k5 pro viscous paste on vram and don't use thermal pads😲

ajay_casi

But the problem is k5 pro is not available in our country 😪

busu3

ajay_casi said:

pulkitking24 said:

for Vram i am using 0.5 mm and for other part i am using 1 mm

What xapim saying is use k5 pro viscous paste on vram and don't use thermal pads😲

I am using thermal pads only. I dont seem to have any problems. U just need to find the right thermal pad size. If u r from india k5 pro is available(just guessing from ur name). The most important part from my experience is the thermal paste application.

ajay_casi

busu3 said:

ajay_casi said:

pulkitking24 said:

for Vram i am using 0.5 mm and for other part i am using 1 mm

What xapim saying is use k5 pro viscous paste on vram and don't use thermal pads😲

I am using thermal pads only. I dont seem to have any problems. U just need to find the right thermal pad size. If u r from india k5 pro is available(just guessing from ur name). The most important part from my experience is the thermal paste application.

Yeah bro ur guess is right I'm from india, but the k5 pro is currently not available, which thermal paste and thermal pads did you used to re paste? 

busu3

I bought kryonaut and adwits thermal pads from amazon. Its conductivity is 6 wm.k which is i think reasonably good. High end pads like arctic arent available anywhere. U dont get much though so u have to use the pads carefully. I think k5 pro is also available on amazon

ajay_casi

busu3 said:

I bought kryonaut and adwits thermal pads from amazon. Its conductivity is 6 wm.k which is i think reasonably good. High end pads like arctic arent available anywhere. U dont get much though so u have to use the pads carefully. I think k5 pro is also available on amazon

  K5 pro currently not available out of stock maybe, now I'm confused with pads or paste. Which one should I use them on in vram?

busu3

Hmm weird for me it says available. U can use pads on vram. There wont be a very big difference but k5 maybe better. I am using thermal pad only i am not facing any huge temp issues. My gpu is at 70'C on max fans and its overclocked too.

ajay_casi

busu3 said:

Hmm weird for me it says available. U can use pads on vram. There wont be a very big difference but k5 maybe better. I am using thermal pad only i am not facing any huge temp issues. My gpu is at 70'C on max fans and its overclocked too.

 Is it available? Where? 

busu3

Its there on ubuy. On amazon its too expensive.

pulkitking24

bro i am using adwits thermal pads thermal pad for vram and other part too and i bought this from amazon you can buy. but if you wanna use these more then one time then cut them properly . in this pack you get 3x0.5mm , 3x1mm , 3x1.5mm 
https://www.amazon.in/ADWITS-Thermal-Conductive-Silicone-Conductivity/dp/B07X38254H/ref=sr_1_2?dchild=1&keywords=adwits+thermal+pads&qid=1601297299&sr=8-2

ajay_casi

pulkitking24 said:

bro i am using adwits thermal pads thermal pad for vram and other part too and i bought this from amazon you can buy. but if you wanna use these more then one time then cut them properly . in this pack you get 3x0.5mm , 3x1mm , 3x1.5mm 
https://www.amazon.in/ADWITS-Thermal-Conductive-Silicone-Conductivity/dp/B07X38254H/ref=sr_1_2?dchild=1&keywords=adwits+thermal+pads&qid=1601297299&sr=8-2

Well I'm confused between thermal pad or k5 pro! What is the thickness for vram and other components?

busu3

ajay_casi said:

pulkitking24 said:

bro i am using adwits thermal pads thermal pad for vram and other part too and i bought this from amazon you can buy. but if you wanna use these more then one time then cut them properly . in this pack you get 3x0.5mm , 3x1mm , 3x1.5mm 
https://www.amazon.in/ADWITS-Thermal-Conductive-Silicone-Conductivity/dp/B07X38254H/ref=sr_1_2?dchild=1&keywords=adwits+thermal+pads&qid=1601297299&sr=8-2

Well I'm confused between thermal pad or k5 pro! What is the thickness for vram and other components?

Use the thermal pad itself since currently its difficult to get k5 pro. It will definitely do the job. The thickness i think varies from laptop to laptop or maybe even heatsink to heatsink. For instance, I asked in the community and it was said 1.5 mm is the correct size but when I use 1.5 mm the heatsink made absolutely 0 contact with the gpu and hence I had to take my laptop apart and I tried 1mm and 0.5mm. Currently I have 1 mm on everything and it works perfect. To find ur size, u can apply little bit of paste(any dummy paste) on the dies and then place the heatsink on the components(with the thermal pads). Then u take of the heatsink to see if the paste spread or not. If it spread then u can put ur best paste on the die and put back the laptop together.

pulkitking24

i have a predator 300 2019 model and i am using 0.5 on Vram and 1mm on other components. i am using these for more then a month so far no issue. if you wanna do liquid metal on cpu and gpu then go with 0.5 mm thermal pad on vram and 1 mm on other components.

ajay_casi

pulkitking24 said:

i have a predator 300 2019 model and i am using 0.5 on Vram and 1mm on other components. i am using these for more then a month so far no issue. if you wanna do liquid metal on cpu and gpu then go with 0.5 mm thermal pad on vram and 1 mm on other components.

 No, I'm not going to use the liquid metal , i have artic mx 4 2019

pulkitking24

i don't use it but you can find it online through various thread related to overclocking 
search msi temp limit is locked or grayed out something like that you might find some video related to this