PLEASE HELP COMPUTER NOT STARTING? Acer Veriton Desktop

Sallyhhh
Sallyhhh Member Posts: 4 New User
edited March 2024 in 2020 Archives
https://youtu.be/YECL8zhh_Lw
Ill be adding my computer details in a little bit, sorry it’s my first time using this 

Answers

  • Sallyhhh
    Sallyhhh Member Posts: 4 New User
    This problem has been happening since I accessed files from an O drive in a shared network about 5 days ago. Happens almost every day, more than once. 
  • billsey
    billsey ACE Posts: 35,226 Trailblazer
    Double check quickly to make sure your DVI cable hasn't come loose at one end or the other.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • StevenGen
    StevenGen ACE Posts: 12,918 Trailblazer
    You are getting the "DVI-0 No Signal" warning which means that your monitor is not getting a signal, do what 'billsey; suggested or change the DVI cable to monitor and see if that is the problem, otherwise it could be your graphics card, inspect and take graphics card out and clean pins and make sure that he graphics cards fan is cleanand not overheating. 
  • Sallyhhh
    Sallyhhh Member Posts: 4 New User
    Hello,
    thank you for the replies but that’s not what seems to be the issue. My computer will still display but that’s only if the 5 beeps don’t happen upon start up. I think that is where the issue lies, I’m just not sure what to do about that 
  • Sallyhhh
    Sallyhhh Member Posts: 4 New User
    StevenGen said:
    You are getting the "DVI-0 No Signal" warning which means that your monitor is not getting a signal, do what 'billsey; suggested or change the DVI cable to monitor and see if that is the problem, otherwise it could be your graphics card, inspect and take graphics card out and clean pins and make sure that he graphics cards fan is cleanand not overheating. 
    I’ll try the graphics card, hopefully it solves the beeping issue 
  • billsey
    billsey ACE Posts: 35,226 Trailblazer
    OK, let's try and dig deeper into the beeps, I didn't have my volume set high enough to hear them when I looked at your video before...
    Which model Veriton do you have? AMI by default gives five beeps on a processor failure, but that could also be a card or memory that blocks the processor. since it doesn't happen every time it's more likely to be some corrosion on contacts than an actual component failure.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.