black screen on my Switch 3

jjsanmartin
jjsanmartin Member Posts: 11

Tinkerer

edited November 2023 in 2020 Archives
My Switch 3 don´t start, blue light ok, but no screen.
Any image on it.
:-( 
What can I do?
Model N17H1

JS

Best Answer

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Answer ✓
    Sorry. That probably won't work with a passive USBC-to-HDMI adapter since it's specified as USBC DisplayPort output signal only. However, some laptops do come with dual mode DisplayPort capable converting to HDMI output signal with a passive cable. You can try it. Jack E/NJ

    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Turn machine off. Remove charger. Gently insert a paperclip into the reset pinhole on the bottom for about 10 seconds. Then plug the  charger back in and turn the machine on again. Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    Thanks Jack
    but there is no pinhole on the bottom, the only hole is the mic on the left side.

    :-(
    JS
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Hve you tried pressing the Fn+F6 and Fn+F5 screen toggle key combinations? Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    Yes I tried, but nothing happened
    JS
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Did this happen suddenly for no apparent reason? Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    It was working OK, and then from one day to another, this problem...
    When I turned it on, the screen changes from OFF to BLACK, a slight shadow of light appears in the background if you look with attention
    JS

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    I turned OFF the tablet, pressing for more than 4 secs, the blue light off, thast´s ok.
    I turn ON the tablet and it´s the same. the screen changes from OFF to BLACK
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Does the ACER logo screen appear at any time when you turn it on? Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    No, all black
    no Bios screen neither
    I tried with the F10 or F2 to open the Bios screen, but nothing.
    JS

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Do you have an external TV or monitor that supports displayport input? This is the only way we can test if your graphics adapter is still active. If not, it has to be opened up to reset the battery pack. Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    JackE said:
    Do you have an external TV or monitor that supports displayport input? This is the only way we can test if your graphics adapter is still active. If not, it has to be opened up to reset the battery pack. Jack E/NJ
    Yes I have, but with what output jack?  USB?  USB-C ?

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    USB-C should have displayport output. Also, can you make out any images on the screen using a flashlight? Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    JackE said:
    USB-C should have displayport output. Also, can you make out any images on the screen using a flashlight? Jack E/NJ
    Flashlight???

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Yes flashlight. Battery-powered lantern. Linterna de bateria. Sometime black screens are caused by failure of the LCD's LED backlight. By shining a flashlight beam on the screen at a certain angle, you can sometimes see screen images from reflected light from the beam. If you see images, this would mean the graphics adapter and mainboard are OK but the LCD LED backlight may have failed.   Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    JackE said:
    Yes flashlight. Battery-powered lantern. Linterna de bateria. Sometime black screens are caused by failure of the LCD's LED backlight. By shining a flashlight beam on the screen at a certain angle, you can sometimes see screen images from reflected light from the beam. If you see images, this would mean the graphics adapter and mainboard are OK but the LCD LED backlight may have failed.   Jack E/NJ
    Hi JackE
    I tried everything but it's the same
    is like de backlight is on but no images appear on it
    "If you see images, this would mean the graphics adapter and mainboard are OK but the LCD LED backlight may have failed. " I think it's the opposite 
    :-(

  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    >>>Yes I have [DisplayPort external monitor], but with what output jack?  USB?  USB-C ?

    Do you have a USBC-to-DisplayPort adapter cable so we can check the graphics adapter on your DisplayPort monitor? They are inexpensive. Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    JackE said:
    >>>Yes I have [DisplayPort external monitor], but with what output jack?  USB?  USB-C ?

    Do you have a USBC-to-DisplayPort adapter cable so we can check the graphics adapter on your DisplayPort monitor? They are inexpensive. Jack E/NJ

    I don't and I don't have other monitor... maybe an adapter USB-C to HDMI to check with the TV ?
    I can try to find it.
    JS
  • JackE
    JackE ACE Posts: 44,898 Trailblazer
    Answer ✓
    Sorry. That probably won't work with a passive USBC-to-HDMI adapter since it's specified as USBC DisplayPort output signal only. However, some laptops do come with dual mode DisplayPort capable converting to HDMI output signal with a passive cable. You can try it. Jack E/NJ

    Jack E/NJ

  • jjsanmartin
    jjsanmartin Member Posts: 11

    Tinkerer

    JackE said:
    Sorry. That probably won't work with a passive USBC-to-HDMI adapter since it's specified as USBC DisplayPort output signal only. However, some laptops do come with dual mode DisplayPort capable converting to HDMI output signal with a passive cable. You can try it. Jack E/NJ
    Thanks JackE
    I'll send it to Acer post-Service...
    JS