Acer switch one 10 is there anyway to flash emmc with win 10 iso

System
System Member Posts: 4,562 Seasoned Practitioner WiFi Icon
edited November 2023 in 2020 Archives
This discussion was created from comments split from: acer aspire switch 10 no bootable device.

Comments

  • temsky
    temsky Member Posts: 1 New User
    edited June 2019
    Ihave an Issue on My Acer switch one 10,
    scenario : emmc os gone because I've created partition from unlocated  to C, 
    my question : 
    is there anyway to flash emmc with win 10 iso?
    and is there a way to recover it original windows from emmc?

    right now I cannot install win 10 , because bios wont read from usb bootable with win 10, is it because emmc now change from unlocated to drive C??
    things I can do so far bypass via usb only with hyrens 10pe, but still I cannot load any win 10 instalation.

    shall I wipe drive C with partition manager?



    Thanks in advance
  • ZeTo
    ZeTo Member Posts: 38 Troubleshooter
    Hi, I've the exactly same question. Did you wiped the drive C? Manage to install Windows 10? 
  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    edited January 2020
    You can try the ALT+F10 cold boot factory reset. 


    Jack E/NJ

  • billsey
    billsey ACE Posts: 34,601 Trailblazer
    If you have removed the boot partitions from the eMMC drive then the Acer recovery won't work, since the recovery image is gone. Your best bet is likely to boot on an appropriate Windows install flash drive, then from the install process wipe any existing partitions and install to the now unallocated drive (Do not create a partition manually!). Windows will create each of the required partitions and install the OS. You will likely need to download some drivers to a different machine so you can install them as needed, especially the WiFi drivers. Once you have WiFi up you can pull anything else needed from the Acer support site.
    If you haven't removed the boot partitions and only have screwed up the C: drive, then Jack's suggestion is best, it'll put the original OS and software load back in place.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • JordanB
    JordanB ACE Posts: 3,729 Pathfinder
    edited January 2020
    I agree with JackE and Billsey that your best option is Alt+F10.....or getting recovery media from Acer.

    However, it can probably be done by reading the solution in link below.  Your device probably has a 32 bit UEFI.  I'm not sure about potential complications due to small 32 GB eMMC.  The instructions are for Windows 8.1, but are same for Windows 10.  Good luck.

    https://community.acer.com/en/discussion/323664/acer-aspire-switch-10-usb-boot-windows-8-1-installation-from-usb

    https://rufus.ie/


    Edit:  Rufus settings:   UEFI (non CSM), GPT, FAT32     (32 bit ISO)
    Edit2:  A 32 bit Windows 10 ISO can be found here.

    I'm not an Acer employee.