Acer Spin 1 (SP111-32N) battery no longer detected, running only by AC-Power

Peter918

Hi,
I need some help and would be great to get a solution for my problem.
Like said at the topic my Acer Spin 1 is only running under AC-Power because the
inside battery is no longer detected.

All runs fine and there was no problem with the battery.
I opened the case because I want to change the RAM.
Then I closed it and changed nothing.

I re-started the computer and then the battery was not detected.
I tried all different things and nothin worked out.
The battery is not detected.

I uninstall the battery driver and re-install it.
No success.

I re-opened the case and closed it again without any success.

I unplugged the battery, waited 5min.
Put the battery inside and pressed the power botton for 15seconds.
Put in ac-power and started the computer.
No success.

I also searched for the battery reset botton but could not find it.
I also search for a botton which needs to be pressed when the  case is closed
but I cannot find it.
Below there is an inside pic, maybe someone knows where I can find such bottons.

Does anyone has an idea what to do and can figure out the problem?
Would be really great.
Thanks for any help!!!

JackE

>>>I re-started the computer and then the battery was not detected.>>>

The case safety interlock switch, if so equipped will be located near the mainboard RAM slots. The battery reset switch will be aligned with a pinhole on the bottom case --- if you find no pinhole then no switch. If you changed nothing, then either a battery  wire is broken, its connector to the mainboard needs to be reseated , or its internal voltage controller has failed.  Jack E/NJ