Predator Helios 300 screen and hinge issue. Please help me with a solution.

ShreeTilakraj

Predator helios 300 
Model Name: PH315-51
Part Number: NH.Q3FSI.008

My laptop's screen has 3 bright spots which seems like screen is under pressure whereas the laptop is kept on flat platform. It doesn't affect my screen performance yet. Only visible when laptop is starting up or shutting down. 2 days ago they were faint and only 2 spots , now there are three and they are distinctive too.
And also sometimes screen has blackouts for less than a second, is that normal?
One hinge of the laptop is loose compared to the other, is that a major issue?
My laptop hasn't been dropped, nothing has been spilled or any sort of damage.
I have checked with external screen the patches do not appear there and no blackouts either.
I noticed the problem has been for about 3 weeks or so now.

xapim

ShreeTilakraj thats called backlight bleed and its normal in all ips panels some have more some less you have nothing to worry about it but you can try to relief the pressure if you have bezel with screws or even screws under the bezel as sometimes the screws are too tight causing even more bleeding, regarding the hinges there are ppl that force lift the screen to open on one of the sides only that may cause serious damage the screen should always be lifted to open right from the center position not from the sides as many do what usually breaks its the plastic clamps that hold the chassis tight when not opened correctly not the hinge itself if you would post some pics it would help

ShreeTilakraj

I have attached the pictures of the bleeding and now the brightness button works with 30 secs of lag.

These pics are of the two bleeds in the bottom right corner of the screen.

bogdanb

The hinge is definitely going to be a problem for you.
That's how it started for me and then it ended up breaking all together.

From what i see there is a major design flaw with the hinge, screen, bezel and back panel.
The entire weight of the screen rests in 6 small screws attached at the bottom and 2 at the top.
the screws attach to metal nuts inserted in plastic. The nuts plastic inserts are extremely weak and will break.

http://tinyurl.com/y445eu84

If yours ends up breaking then you need these parts
https://www.amazon.com/gp/product/B07KWDSPLZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B07Q62KR7P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

if your laptop is not in warranty anymore i would open-up the bezel and look what is going on with the hinges.

If they are only lose you can tighten the screws to your liking.

xapim

ShreeTilakraj well if youre still on warranty i would probably send it back to get that checked if you have warranty seals but if not you can open it yourself and see whats going on because as it was said above in the long term you might have issues with it