Acer Nitro 5 - BLACK SCREEN - AFTER BIOS UPDATE - NO BOOT - Kb LEDS on - BIOS NOT ACCESSIBLE

xborder
xborder Member Posts: 2 New User
edited November 2023 in 2019 Archives
Acer Nitro 5 -( *DH5VF / LA952P - AN515-52) - BLACK SCREEN - NO BOOT -

Hi. I bought my Nitro 5 / SNID: XXXXX in Bangkok Thailand in October 2018, now in Amsterdam, Netherlands, I was playing around in the Legacy Bios, and i Disabled / Configured the PCI configuration. OOOOPS> My nitro wont boot up, only a black sceen, i tried everything: battery flash, bios flash, external sceen, sadly nothing works: the screen stays black: When i connect an external display it goes on and off. same as the ventilators. there on: and after 7 seconds off. Keyboard LED stays on. LED'S (blue and yellowish) stay on.

kind regards.peter 

[Edited the content to protect personal information - Acer-David]

Answers

  • Is this option only available with an unlocked bios? You have probably corrupted the bios.
    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • JackE
    JackE ACE Posts: 44,907 Trailblazer
    edited September 2019
    You can first try to reset the BIOS externally by removing the charger. Then gently inserting a paperclip into the battery reset hole for about 30 seconds while at the same time pressing and holding the power button. Let the machine rest for 15mins before trying to turn it on again. If it still fails then you can try to reset the BIOS chip internally by disconnecting its coin cell battery and shorting out its mainboard slot. Remove the HDD and RAM doors. Remove 15 screws from the bottom cover and gently pry it off. Then pull the battery pack and BIOS battery connectors from their mainboard slots. Short out the BIOS battery slot on the mainboard with a suitable metal tool for a few seconds to remove residual charge from the BIOS hardware. Jack E/NJ


    Jack E/NJ

  • xborder
    xborder Member Posts: 2 New User
    I tried all possible ways allready.. The bios wont flash... :S 
  • JackE
    JackE ACE Posts: 44,907 Trailblazer
    >>> I was playing around in the Legacy Bios, and i Disabled / Configured the PCI configuration. >>>

    Were you trying to install Linux in legacy mode from a bootable USB installation stick? Jack E/NJ

    Jack E/NJ