Touchpad Synaptics/ELAN NOT showing in Device Managers PH315-51

Oyos

Hi, as the subject says, I cannot find the touchpad synaptics/elan in the device manager. My problem is that I cannot use touchpad gestures such as two-finger scroll, etc. but I can use the touchpad for clicking and normal scrolling. I have attached a screenshot of what I am seeing in the device manager. Please help. Thanks.

brummyfan2

Oyos said:

brummyfan2 said:

Hi,
Have you switched to Advanced in BIOS after installing the driver?

NOW IT WORKS FINE!!! BIG THANKS!

You are welcome 

Oyos

To add, I have downloaded both drivers from the acer website as shown in the attached file.

brummyfan2

Hi,
We need to know the laptop model name, like E5-xxx etc, in the mean time, go to BIOS screen, move to Main tab and check whether the Touchpad is in Basic mode, if it is switch to Advanced and see whether it helps.

Oyos

Thanks. I followed what you said and switched it to Advanced. Now the touchpad is not working entirely. It cannot scroll nor click.

Laptop model is PH315-51. Here is new screenshot of the device manager.

Will keep it in advanced for now and wait for your reply. Thanks.

brummyfan2

No problem, go to Device manager, expand Human Interface Devices and post the snip.

Oyos

Here it is:

Thanks

brummyfan2

Hi,
I am trying to find the actual device used in your laptop, whether it's Synaptics or Elan touchpad, so be patient, now you don't have I2C HID device missing in Human Interface Devices. You have to do these things:
1. You have two HID Compliant mouse under Mice and other pointing Device, check their Hardware IDs.
Right click HID-compliant mouse and select Properties, move to Details tab, select Hardware IDs with the drop down arrow, and show me the Value by taking a snip and posting in your reply, please do for both HID-compliant mouse.
2.Go to Device manager, expand System Devices, check the driver version for Intel Serial I2C Host controller, post the snip.

Oyos

Thanks for your prompt replies.

1. Snips of HID-compliant mouse

1st:

 



2nd:



2. Snip of System Devices:


Let me know if I messed up any of the snips. Thanks again.

brummyfan2

Hi,
Could you please check the driver version for Intel Serial IO in Device manager, then download the version 30.100.1727.1 and install it. I couldn't find the Touchpad from the HID-compliant mouse snips.
https://www.acer.com/ac/en/GB/content/support-product/7603?b=1

brummyfan2

Could you please remove Logitech mouse for the time being.

Oyos

Here is the Driver Version:



It seems I have the same version with the one you asked me to download.

If I remove the Logitech mouse, there will be no way for me to scroll/navigate since I am still in the "advanced" setting of touchpad in BIOS. Should I revert to "Basic" for the meantime? 

Thanks

Commodore_1995#

Do you get the touchpad device, appears as hidden device in humanad interface devices too?

brummyfan2

Yes, revert to Basic and check the drivers and Hardware IDs for the mouse and check Human Interface devices by expanding them. Try to find whether it states either Synaptics or Elan in any of the Details tab, then only we can install the correct driver.

Oyos

egydiocoelho said:

Do you get the touchpad device, appears as hidden device in humanad interface devices too?

Hi, Synaptics still does not appear even if I chose the option to "show hidden devices"

Commodore_1995#

So do what colleague brummyfan2 said and then copy and paste the idhardware.

brummyfan2

You could also try reinstalling the Serial IO driver after uninstalling the current one.

brummyfan2

Also have a look at this thread:https://community.acer.com/en/discussion/533339/predator-helios-300-touchpad-not-working

Oyos

So I switched back to Basic and here is the screenshot of the HID:

 

brummyfan2 said:

You could also try reinstalling the Serial IO driver after uninstalling the current one.

Not sure how to do this. Just right click then uninstall right? But I dont know how to reinstall it afterwards. Sorry but please walk me through this as well.

Thank you.

brummyfan2

Oyos said:

So I switched back to Basic and here is the screenshot of the HID:

 

brummyfan2 said:

You could also try reinstalling the Serial IO driver after uninstalling the current one.

Not sure how to do this. Just right click then uninstall right? But I dont know how to reinstall it afterwards. Sorry but please walk me through this as well.

Thank you.

Download the Serial IO driver from Acer support site, then go to Device manager, right click Serial IO, select Properties, go to Driver tab and uninstall, then extract the downloaded zip file, open the extracted folder and find the Setup.exe, right click and select "Run as Admin".
https://www.acer.com/ac/en/GB/content/support-product/7603?b=1

Oyos

brummyfan2 said:

Oyos said:

So I switched back to Basic and here is the screenshot of the HID:

 

brummyfan2 said:

You could also try reinstalling the Serial IO driver after uninstalling the current one.

Not sure how to do this. Just right click then uninstall right? But I dont know how to reinstall it afterwards. Sorry but please walk me through this as well.

Thank you.

Download the Serial IO driver from Acer support site, then go to Device manager, right click Serial IO, select Properties, go to Driver tab and uninstall, then extract the downloaded zip file, open the extracted folder and find the Setup.exe, right click and select "Run as Admin".
https://www.acer.com/ac/en/GB/content/support-product/7603?b=1

Thanks for this. I have uninstalled and reinstalled the Serial IO. Unfortunately, gestures on touchpad still not working.

brummyfan2

Hi,
As I wrote before, while in Basic mode and Logitech mouse disconnected, please post the snips of Human Interface device extended, post the snips of Hardware IDs for Standard PS/2 mouse.