Hardware failures in the middle of start up for G3 - 710?

TeleBlue
TeleBlue Member Posts: 29 Troubleshooter
edited February 15 in 2019 Archives
Hi,

Recently I've been noticing that in the middle of starting up my PC, my monitor would lose connection to my PC briefly or the screen would go black for a long period of time before my PC completely restarts. I've checked my reliability monitor and found multiple errors such as this. 

My PC works fine after startup but I'm worried this could get worse in the future. 

Answers

  • MartinJohn00001
    MartinJohn00001 Member Posts: 636 Seasoned Specialist WiFi Icon
    @TeleBlue
    Hi, not to worry. Kindly try to reset the BIOS to default settings.

    RESET BIOS
    ***********    

    1.Turn off the unit. When the unit is off completely, press the power to turn on the unit.
    2.Immediately keep on tapping the F2 to enter the BIOS.                               
    3.In the BIOS, press F9 to reset the BIOS to setup defaults.
    4.At the confirmation screen, press Enter for Yes to load the default configuration.
    5. Press F10 to save your changes, and restart the system. Select Yes and press ENTER to confirm.


    Kindly click "YES" to "Did this answer the question" if my answer helped you!      
    Thank you and have a Blessed Day  :3
  • TeleBlue
    TeleBlue Member Posts: 29 Troubleshooter
    @TeleBlue
    Hi, not to worry. Kindly try to reset the BIOS to default settings.

    RESET BIOS
    ***********    

    1.Turn off the unit. When the unit is off completely, press the power to turn on the unit.
    2.Immediately keep on tapping the F2 to enter the BIOS.                               
    3.In the BIOS, press F9 to reset the BIOS to setup defaults.
    4.At the confirmation screen, press Enter for Yes to load the default configuration.
    5. Press F10 to save your changes, and restart the system. Select Yes and press ENTER to confirm.

    Easy, I'll see if the errors occur again within the next week
  • TeleBlue
    TeleBlue Member Posts: 29 Troubleshooter
    Unfortunately, MartinJohn00001 said:
    @TeleBlue
    Hi, not to worry. Kindly try to reset the BIOS to default settings.

    RESET BIOS
    ***********    

    1.Turn off the unit. When the unit is off completely, press the power to turn on the unit.
    2.Immediately keep on tapping the F2 to enter the BIOS.                               
    3.In the BIOS, press F9 to reset the BIOS to setup defaults.
    4.At the confirmation screen, press Enter for Yes to load the default configuration.
    5. Press F10 to save your changes, and restart the system. Select Yes and press ENTER to confirm.

    The error happened again but this time the report provided a little more information 
  • TeleBlue
    TeleBlue Member Posts: 29 Troubleshooter
    edited August 2019
    Today my PC had trouble starting up the moment I turned it on. I got this notification once the PC started up properly

    My graphics card is specifically an Radeon RX 480
  • billsey
    billsey ACE Posts: 33,968 Trailblazer
    Try powering everything down, then remove and reseat the GPU card. You may be just seeing some dust or corrosion on those contacts.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • TeleBlue
    TeleBlue Member Posts: 29 Troubleshooter
    billsey said:
    Try powering everything down, then remove and reseat the GPU card. You may be just seeing some dust or corrosion on those contacts.
    I've already tried removing the gpu in the past and for some reason something I couldn't see aws holding it in. I undid the screws and flipped the bracket but it still wouldn't come out. 
  • billsey
    billsey ACE Posts: 33,968 Trailblazer
    There's a plastic latch at the back of the slot. You have to hold it to the side in order to remove the card.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • TeleBlue
    TeleBlue Member Posts: 29 Troubleshooter
    billsey said:
    There's a plastic latch at the back of the slot. You have to hold it to the side in order to remove the card.
    So I've unscrewed here and flipped the bracket here 
    And I've held back the plastic latch as far as it goes here 

    Pulling back the plastic latch pushes the graphics card out a tiny bit but it seems like the side opposite the latch is stuck
  • billsey
    billsey ACE Posts: 33,968 Trailblazer
    The latch should bend enough to the side to allow the card to move.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.