Helios 500 and SD Card reader

Schnaz
Schnaz Member Posts: 83 Die Hard WiFi Icon
edited November 2023 in 2019 Archives
Hi i connected usb sd  card reader to helios 500 and windows wont see card at start then is asking to farmad sd card and when I press start format it says "windows couldnt finish operation"
Any one had same problem? Do I need any drivers?

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    Schnaz 
    Please try to format using Disk Management
    Open Disk Management. Right click on My Computer and select item "Manage", and then click Disk Management on the left side. In the center section you can see local hard drive and partitions and the USB drive which can be recognized by capacity.
    Right click the flash drive and select "Format" option and select file system format to perform quick format. However, this action is not workable in some cases, and you need to try step 3.
    Right click on the USB drive and select "New Simple Volume" item. You'll get the New Simple Volume Wizard which guides you recreate new partition for the flash drive. Operations are following the onscreen instructions, setting options and click "Next" button. When the process is done, you'll find the USB drive has been formatted and is properly recognized by system.

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
  • Schnaz
    Schnaz Member Posts: 83 Die Hard WiFi Icon
    Cant see option new simple volume

  • JackE
    JackE ACE Posts: 44,861 Trailblazer
    (1) What brand/model number is the SD card reader?
    (2) What brand/model number is the SD card?

    Jack E/NJ

    Jack E/NJ

  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited August 2019
    Schnaz you stated <<i connected usb sd  card reader>> (dunno if anyone noticed but the OP is not saying the sd card reader itself its not working hes saying the usb card reader that he has its not working) have you tried the sd card itself in the sd card reader slot sometimes the usb card readers won't work properly without the proper drivers unless they are from a good brand because usually the cheap ones most of the times are just useless they just wont work period have had this so many times especially with usb multiple card readers


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/