Trying to install an sata /esata pci express controller card in Aspire M3470 desktop

Gsxrdad
Gsxrdad Member Posts: 1 New User

I'm trying to install a pci express sata adapter as I need 1 internal and 1 Esata connector. I previously tried  a sata /raid combo card , and am now trying  a Startech controller card.

 

My problem is that with either card installed If the internal hard drive is connected the machine wont boot , it displays all drives installed in the system and it says no boot sector found . Through trial and error I found this is the drive connected to the add on pci card. (I also have another additional sata drive connected to the spare sata mother board port and it boots fine with it connected)

 

I contacted Startech before purchasing and was assured that a non raid drive connected to this pci card would not affect normal win 7 64 boot , and was told if problem occurs its an issue with the Acer bios .

 

I have looked and tried all possible bios settings, boot order to no avail ( always returning to default ) Also the RAID bios lists the drive as "non raid" 

 

As a side note I currently use this 3rd sata drive by plugging it into a USB sata adapter and the drive is seen as a removable drive , is usable and boots fine when connected this way.

 

I have no problem replacing the two 500 gb additional hard drives with a single large one connected to the spare MB connector , but I need the Esata connection for an external backup drive .

 

If anyone reads this long post and has any ideas Thank You - Matt

This discussion has been closed.