G3605 1050ti upgrade causing freezing & driver power state BSOD

ccwhitelaw
ccwhitelaw Member Posts: 1 New User
edited February 15 in 2019 Archives
Hello,

  Apologies if there any obvious issues in this but complete noob here.

So upgraded the GPU in my predator g3605 to a gigabyte 1050ti. Removed all power cabling, switched out the cards and updated the drivers with the supplied CD. PC boots up fine, then gets about 5 minutes in each time before everything begins to freeze before I get the driver power state error BSOD. I have checked all the power saving settings in the drivers (all set to best performance) tried updating from the latest drivers from NVIDIA but still nothing. So put the old graphics card back in to try and at least find the old problem without the freezing but now is doing the same thing.

Would very much appreciate any suggestions!

Thanks!

Answers

  • billsey
    billsey ACE Posts: 33,989 Trailblazer
    Which power supply do you have? I'd make sure you have at least 500W with that GPU installed, and IIRC most of the G3-605 models shipped with 300W.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.