CANOT INSTALL WINDOWS FROM FLASH

hatembadran1
hatembadran1 Member Posts: 44 Troubleshooter
edited November 2023 in 2018 Archives
i try install windows from flash
i can not boot
i sent all bois

Answers

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    You have to disable secure boot. If that option is grayed out, create a superviser password and this will enable you to change the secure boot option.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    i already do it and no change
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    What windows are you trying to install? Did you try a different USB port? What is the device's model?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    ven98 said:
    What windows are you trying to install? Did you try a different USB port? What is the device's model?
    win 10 because recovery not work  - yes i try no boot option thats only manger mean must be chose boot file from disk - my device acer spin 515-51gn-83nq
  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    win 10 because recovery not work  - yes i try no boot option thats only manger mean must be chose boot file from disk - my device acer spin 515-51gn-83nq
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    So, you created the windows 10 installation drive from microsoft's website? Do you have access to another device, which you can use to download windows?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    ven98 said:
    So, you created the windows 10 installation drive from microsoft's website? Do you have access to another device, which you can use to download windows?
    yes i have other laptop and have orignal windows , yes i have acsses to other and this flash boot from it good only my laptop acer spin can't boot and can't have option boot
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Maybe you didn't use the right method to create windows installation media. Format the USB flash drive and follow the instructions from ths thread:

    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    yes i do this
    you shoud to know no flash apear in boot
    must be flash driver apear 
    also not have boot

    but no boot option for flash
    when i try see flash in bois no boot

  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Are you sure you followed the exact same procedure using rufus? I don't see a reason why the drive would not appear in the boot menu. Did you try a different USB port. Make sure the USB flash is connected to the USB 3.0 port.


    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    ven98 said:
    Are you sure you followed the exact same procedure using rufus? I don't see a reason why the drive would not appear in the boot menu. Did you try a different USB port. Make sure the USB flash is connected to the USB 3.0 port.

    please check this photo and check boot optiononly boot orderption

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    i wait your response
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    You didn't try any of my suggestions. I don't have any more suggestions.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    ven98 said:
    You didn't try any of my suggestions. I don't have any more suggestions.i downoad from micrsot and burn in flash as you tell
  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    .i downoad from micrsot and burn in flash as you tell
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Did you choose to download the .ISO file for disk image and then used rufus to install it on the drive?

    You didn't mention whether you tried a different port.

    From your screenshot I see that you haven't disabled secure boot.

    If you follow these steps I don't see a reason why the boot manager wouldn't detect the USB drive, except:

    Is your BIOS set to UEFI or Legacy?


    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    thats my problem my bios only must be uefi
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    And is your BIOS set as UEFI?
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • hatembadran1
    hatembadran1 Member Posts: 44 Troubleshooter
    bois no have option
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    I don't know why the BIOS doesn't have an option to change betwen legacy and UEFI.

    Can you connect the USB to a different device and check if boot manager will detect the USB drive?

    If the drive is not detect by the other device as well try this. From rufus instead of choosing GPT partition scheme for the USB drive try with MBR. I don't know what else you can try.

    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!