How to enter to windows from H20 setup utility??

NashathShefees
NashathShefees Member Posts: 1 New User
edited August 2023 in 2018 Archives
Whenever I turn on my laptop it is showing a screen of insydeinsydeH20 setup utility.from there how can I go to windows??
F2 is not happening

Answers

  • Balatekie
    Balatekie ACE Posts: 1,353 Pioneer
    Hi @NashathShefees,

    A computer can Boot into Bios if any of 100 or so Bios Settings are OUT of boot parameter.

    Examples:-

    CPU Clock, Memory Timings, Voltage Settings, Devices, Etc......

    This is one way US Over-Clockers know when we can't go any farther; the machine just keeps booting into Bios Setup Screen. Also, If the CMOS Battery is weak and not holding the presets After Bios Setup, the machine will boot to the Bios on every Cold Boot.

    As a work around check whether you have any external devices like flash drive, External HDD connected to the computer. If it so, please disconnect them and then try powering on the unit. 

    Next thing you can do BIOS default. Once computer loads in to H20 setup utility screen, press F9 button in your keyboard and then press Enter. Later press F10 and again press Enter. This should reset your BIOS settings to default. Your computer will automatically reboot. Check what happens and I hope this should work.  

     :) If you think I've answered your question, please hit the Accept Answer:)