Heat got worse after repasting!

Hahaha

I just applied coolermaster thermal paste(1.85W/m.k) on cpu  and gpu heat sinks of nitro5. now the temperatures reach up to 82C in minutes whereas before it used to max out at some 70C in 30 minutes. What could be the solution? Is it harmful for my laptop?

Rudy21

Hahaha said:

I just applied coolermaster thermal paste(1.85W/m.k) on cpu  and gpu heat sinks of nitro5. now the temperatures reach up to 82C in minutes whereas before it used to max out at some 70C in 30 minutes. What could be the solution? Is it harmful for my laptop?

I would recommend using a well branded thermal paste in more amount will definite bring the result

Rudy21

Hahaha said:

I just applied coolermaster thermal paste(1.85W/m.k) on cpu  and gpu heat sinks of nitro5. now the temperatures reach up to 82C in minutes whereas before it used to max out at some 70C in 30 minutes. What could be the solution? Is it harmful for my laptop?

Please share the complete model number of your device to check how much temperature it can withhold.

ikke_369

i had it before, i had a self build PC with an FX8350 8(180W) and i had to take it apart for some reason and it was running way hotter. problem was i was too cheap with my thermal paste usage and i didnt use enough. just take it off again, use some pure ethanol to clean the cpu and the heatsink and be generous with that thermal paste. if you see it coming out the side between the heatsink and the cpu, u have used enough.

Hahaha

Rudy21 said:

show previous quotes

Hahaha said:

I just applied coolermaster thermal paste(1.85W/m.k) on cpu  and gpu heat sinks of nitro5. now the temperatures reach up to 82C in minutes whereas before it used to max out at some 70C in 30 minutes. What could be the solution? Is it harmful for my laptop?

Please share the complete model number of your device to check how much temperature it can withhold.

AN515-51 i77700hq. 16gb ddr4 RAM. gtx1050. By the way the temps were lower with stock paste before me repasting it

Hahaha

ikke_369 said:

i had it before, i had a self build PC with an FX8350 8(180W) and i had to take it apart for some reason and it was running way hotter. problem was i was too cheap with my thermal paste usage and i didnt use enough. just take it off again, use some pure ethanol to clean the cpu and the heatsink and be generous with that thermal paste. if you see it coming out the side between the heatsink and the cpu, u have used enough.

Ikke I used th same (perhaps more) amount as shown in a video for the laptop. I don't know what could have happened. However the guy in the video used thermal grizzly kryonaut. Shoul i use even more because my paste is cheap ?

Rudy21

Hahaha said:

I just applied coolermaster thermal paste(1.85W/m.k) on cpu  and gpu heat sinks of nitro5. now the temperatures reach up to 82C in minutes whereas before it used to max out at some 70C in 30 minutes. What could be the solution? Is it harmful for my laptop?

I would recommend using a well branded thermal paste in more amount will definite bring the result