Aspire 515-51G

4antom
4antom Member Posts: 56 Troubleshooter
edited August 2023 in 2018 Archives
Has anyone got any performance tips or settings to tweak or any information on this device?

Best Answer

  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    edited November 2018 Answer ✓
    Open Control Panel. Search power plan. Select choose power plan on left panel. Make sure power plan is set to high performance. CPU/GPU acceleration usally active only when plugged in with a nearly fully charged battery. Driver updates can be found on the link below but do NOT download and apply any if you're having no problems with the machine, especially any BIOS updates. User manual and other documents can also be downloaded at the same link. Also make sure system protection is enabled by again searching control panel for restore point, choose create restore point in left panel. Then click configure.  Jack E/NJ

    https://www.acer.com/ac/en/US/content/support-product/7244?b=1

    Jack E/NJ

Answers

  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    edited November 2018 Answer ✓
    Open Control Panel. Search power plan. Select choose power plan on left panel. Make sure power plan is set to high performance. CPU/GPU acceleration usally active only when plugged in with a nearly fully charged battery. Driver updates can be found on the link below but do NOT download and apply any if you're having no problems with the machine, especially any BIOS updates. User manual and other documents can also be downloaded at the same link. Also make sure system protection is enabled by again searching control panel for restore point, choose create restore point in left panel. Then click configure.  Jack E/NJ

    https://www.acer.com/ac/en/US/content/support-product/7244?b=1

    Jack E/NJ

  • 4antom
    4antom Member Posts: 56 Troubleshooter
    JackE said:
    make sure system protection is enabled by again searching control panel for restore point

    Hmm, seems Like I should probably do that before anything really. Thanks for the info 😉
  • 4antom
    4antom Member Posts: 56 Troubleshooter
    IDK why there are two clones here.
  • JackE
    JackE ACE Posts: 45,081 Trailblazer
    >>>IDK why there are two clones here.>>>

    The community boards are set up to duplicate a marked solution immediately after the first post in the thread, in addition to its chronological position in the thread. This is so folks don't have to read thru very long threads to find the solution. Your's was a short thread so the duplicates showed up back to back. Good luck with the machine if that's the one you got. Jack E/NJ

    Jack E/NJ