Access the RAM on an Aspire Z1-623

AlexAlexFR
AlexAlexFR Member Posts: 7 New User
edited March 1 in 2018 Archives
Hello,

I would like to change the RAM on my PC. I know how the change the HDD but I don't find the RAM. If you have a video or images or even a guide, this will help me a lot.

Thank you.

Best Answer

  • brummyfan2
    brummyfan2 ACE Posts: 28,104 Trailblazer
    Answer ✓
    Hi,
    I think you know how to arrive to this stage as you have mentioned that you know how to change the HDD, from hereon, you need to disconnect cables A->J, remove 7 screws(K,L) from the main board assembly, remove the main board assembly from the system, then remove 11 screws from the assembly to remove the bracket and upgrade memory. HTH.
    To summarise:
    1. Disconnect the cables( A->J), mark them or take a picture.
    2. Remove 7 screws (K,L) from the main board assembly.
    3. Take out the main board assembly.
    4. Remove 11 screws to remove the bracket.
    5. Separate the bracket from main board.





Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,104 Trailblazer
    Answer ✓
    Hi,
    I think you know how to arrive to this stage as you have mentioned that you know how to change the HDD, from hereon, you need to disconnect cables A->J, remove 7 screws(K,L) from the main board assembly, remove the main board assembly from the system, then remove 11 screws from the assembly to remove the bracket and upgrade memory. HTH.
    To summarise:
    1. Disconnect the cables( A->J), mark them or take a picture.
    2. Remove 7 screws (K,L) from the main board assembly.
    3. Take out the main board assembly.
    4. Remove 11 screws to remove the bracket.
    5. Separate the bracket from main board.





  • AlexAlexFR
    AlexAlexFR Member Posts: 7 New User
    Hi,
    I think you know how to arrive to this stage as you have mentioned that you know how to change the HDD, from hereon, you need to disconnect cables A->J, remove 7 screws(K,L) from the main board assembly, remove the main board assembly from the system, then remove 11 screws from the assembly to remove the bracket and upgrade memory. HTH.
    To summarise:
    1. Disconnect the cables( A->J), mark them or take a picture.
    2. Remove 7 screws (K,L) from the main board assembly.
    3. Take out the main board assembly.
    4. Remove 11 screws to remove the bracket.
    5. Separate the bracket from main board.





    Thank you so much! You just saved me!