The colordiffrense on the heatsync is normal? Can i Just keep the liquid metal on?

System
System Member Posts: 4,549 Seasoned Practitioner WiFi Icon
edited November 2023 in 2018 Archives
This discussion was created from comments split from: My bunky setup!.

Comments

  • Theunknownplayer88
    Theunknownplayer88 Member Posts: 11

    Tinkerer

    This is my predator 48h after the liquid metal repaste (thermal grizzly) , 80-85'celcius gaming battlefield 1 ultra, 48-60 celsius on 3d mark 
    81-84 celsius pubg ultra 
    Before i had UP to max 98'celcius 
    after the teredown i try to use grizzly kryonaut, 93,'celsius max
    Battlefield1 83-89, celsius. Jump for a sec to 93'c


    The copper heatsynk is okay i think, is normal to lose if not add color on the heatsync? I used nailpolish and i sted of tape i use a thin layer of silicone around it and locked IT inside..
    And comments? 
  • Theunknownplayer88
    Theunknownplayer88 Member Posts: 11

    Tinkerer

    The colordiffrense on the heatsync is normal? Can i Just keep the liquid metal on? Anyone know? 
  • sri369
    sri369 ACE Posts: 2,763 Pathfinder
    @Theunknownplayer88 Color change on metals when heated is normal, I do not think you need to worry about color change due to heat.
    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • Theunknownplayer88
    Theunknownplayer88 Member Posts: 11

    Tinkerer

    Tanks for the answer 👍😊 
  • sri369
    sri369 ACE Posts: 2,763 Pathfinder
    Click on 'accept answer' if you feel it helped. this helps mark the thread as solved for anyone with similar question later.
    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve